China Air compressor Oring Manufacturer, Supplier, Factory

The Atlas Copco air compressor oil level indicator, although having a simple structure, is of vital importance for the safe operation of the equipment. During daily inspections, special attention should be paid to whether the oil level is normal and whether the oil quality has deteriorated. This ensures that the lubricating, cooling and sealing functions of the lubricating oil are fully exerted, thereby extending the service life of the air compressor.

Maintenance tips for Atlas Copco air compressor thermostat kit: Regularly remove the thermostat valve for cleaning, remove foreign substances that may exist in the lubricating oil, and prevent blockage. You can put the valve core in 80℃ water to observe. If the valve core expands fully in this environment and is 10-15mm longer than at normal temperature, then the valve core is normal. If there are aging or other issues, the thermostat valve needs to be replaced.

Atlas Copco 2013400282，Effectively intercept metal shavings, fibers, gums, moisture and external dust in the lubricating oil, preventing them from entering the main unit and the oil circuit system, and avoiding mechanical wear and contamination. Maintain the cleanliness of the oil, reduce the wear of precision parts such as bearings and gears, lower the failure rate, and thereby extend the overall service life of the air compressor. Clean lubricating oil can reduce friction resistance, improve compression efficiency, reduce unplanned downtime, and ensure the normal operation of the oil separator, reducing the oil content in the compressed air. Filter out aged substances and carbon deposits to prevent them from forming carbon deposits under high temperatures, which would affect the cooling effect and lubrication performance, and ensure that the lubricating oil continues to function effectively.

Maintenance and replacement instructions for the 2901358100 VCU service kit of Atlas Copco screw air compressors When the compressor experiences frequent loading/unloading, pressure out-of-control, valve sticking, or 2901358100 VCU leakage, it may be related to the valve control unit failure. It is recommended to use this service kit for repair. During the replacement process, follow the specifications in the equipment manual, pay attention to the correctness of electrical connections and the installation direction of sealing components, and if necessary, calibrate the control parameters to ensure that the 2901358100 VCU function returns to normal after the repair.

Atlas Copco Maintenance and Replacement: Regularly inspect the wear, deformation or aging of the special-shaped rings (such as whether the rubber rings have hardened, or if the metal rings have cracks). Replace them immediately if any abnormalities are found. When replacing, it is necessary to use the original or the same specification special-shaped rings. Standard rings cannot be used as substitutes (even if the sizes are close, shape mismatch may still cause functional failure). During the disassembly and installation process, avoid hitting the weak parts of the special-shaped rings (such as thin walls, sharp corners), to prevent deformation and damage. Although the special-shaped rings of the air compressor are not universal, they play an irreplaceable role in special structural parts. Their design and manufacturing need to strictly match the specific requirements of the equipment, and special attention should be paid to precision and directionality during installation and maintenance to ensure the coordinated operation of all complex components of the air compressor.

1092110800 Maintenance and Replacement Instructions for the Transmission Shaft Seal Kit of the Haskomp Screw Air Compressor If oil stains are found near the transmission shaft or there is oil leakage, or if the consumption of the compressor lubricant increases abnormally, this may be due to the aging or damage of the seal kit. Therefore, it is necessary to conduct an inspection and replace it in a timely manner. When replacing, use the original seal kit and follow the equipment manual for operation to ensure that the installation direction of the sealing piece is correct and it is tightly attached. If necessary, special tools can be used for installation to avoid deformation or damage to the sealing piece.