+86-15802015368
atlascopco128@163.com
English
Dongguan Taike Trading Co., Ltd.
Dongguan Taike Trading Co., Ltd.
Products

Products

China 2906081300 ZT160-275 COOLER KIT Manufacturer, Supplier, Factory

Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for 2906081300 ZT160-275 COOLER KIT, Atlas Copco, 2906081300, Atlas Copco 2906081300, 2906081300 Atlas Copco, If possible, make sure you send your necessities with a detailed list including the style/item and quantity you require. We'll then mail our greatest selling prices to you.
2906081300 ZT160-275 COOLER KIT, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we present, effective and satisfying consultation service is supplied by our specialist after-sale service team. Product lists and comprehensive parameters and any other info weil be sent for you timely for your inquiries. So make sure you make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We have been confident that we are intending to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.

Related Products

Hot Products

  • 2901056100 Atlas Copco air Compressor Shaft Sleeve Oil Seal Kit C55 Oil Shaft Original

    2901056100 Atlas Copco air Compressor Shaft Sleeve Oil Seal Kit C55 Oil Shaft Original

    Atlas Copco Air Compressor Shaft Sleeve Oil Seal Kit C55 Oil Shaft - Importance Although the shaft sleeve oil seal kit is a small component, it directly affects the operating cost and reliability of the compressor: Leakage will lead to increased lubricant consumption, environmental dirtiness, and even serious faults such as bearing wear of the main unit and rotor sintering due to lack of oil. It is recommended to replace it with the original Atlas Copco C55 kit to ensure the matching accuracy and sealing performance with the main unit.
  • 2903775400=1625775400 Atlas Copco Screw air compressor Oil Filter Original

    2903775400=1625775400 Atlas Copco Screw air compressor Oil Filter Original

    Atlas Copco 2903775400=1625775400 Notes for Attention Choosing the original factory oil filter (such as the products corresponding to these two numbers) can ensure that the filtration efficiency, size accuracy and equipment are fully matched, avoiding the risk of host wear caused by the failure of inferior filter elements. If there is a replacement relationship between the numbers, when replacing, you can directly use the new number parts, and their performance and compatibility are the same as the old numbers.
  • Atlas Copco 1625202601 S9U Electrical Drive Motor

    Atlas Copco 1625202601 S9U Electrical Drive Motor

    1622904201 = 1625202601 S9U Electrical Drive Motor: If you are looking for Atlas Copco 1625202601 S9U Electrical Drive Motor China Supplier, you are on the right page. Being one of the genuine spare parts online suppliers of air compressors in China, we strives to serve you the “Genuine Brand New Motor” with great discount.
  • 3001160212 Atlas Copco air compressor Original Atlas Copco Oil filter kit RXD Foodgrade

    3001160212 Atlas Copco air compressor Original Atlas Copco Oil filter kit RXD Foodgrade

    Model and compatible models: The oil filter kit for Atlas Copco air compressors comes in various models. Some of them are suitable for oil filters of RXD series lubricants, such as 3001160212, which are applicable to air compressors of models like GA5, GA7, GA11, GA7VSD+, GA11VSD+, GA15VSD+, G7, etc.
  • 1635505200 Atlas Copco Fan Radial

    1635505200 Atlas Copco Fan Radial

    If you are in need of “Genuine Original” 1635505200 Atlas Copco FAN RADIAL or any other fan assembly part numbers for your Atlas Copco compressors, we are your trusted source for exceptional pricing. As a rapidly expanding online supplier of air compressors and spare parts, we are based in China and take pride in offering unbeatable prices without compromising on the quality of our products, which are guaranteed to be 100% genuine and original.
  • Atlas Copco 2906062400

    Atlas Copco 2906062400

    Atlas Copco 2906062400,The main oil pump in the oil pump kit is responsible for delivering lubricating oil to all moving parts of the air compressor, forming an oil film to reduce friction and wear, and ensuring the efficient and stable operation of the equipment. The oil filter is integrated within the oil pump kit and is used to intercept and remove impurities from the lubricating oil, preventing particles from damaging the mechanical components and maintaining the cleanliness of the oil. The oil pump kit usually comes with an oil cooler to regulate the oil temperature and prevent the decline in lubrication performance due to high temperatures. At the same time, an electric heater heats the oil in low-temperature environments to ensure the normal startup of the oil pump. The auxiliary oil pump serves as a backup system and automatically starts when the pressure of the main oil pump is insufficient, ensuring adequate lubrication before the air compressor starts. Additionally, the oil pump kit optimizes the oil supply process through a linkage control mechanism to enhance overall reliability.

  • 2903035101 SEPARATOR OIL

    2903035101 SEPARATOR OIL has a high filtration accuracy, capable of reaching 0.1μm. The filtration efficiency is 99.99%. It can reduce the oil content in compressed air to below 3ppm, with an initial pressure difference of ≤0.02mpa. Moreover, it has a long service life, typically ranging from 3500 to 5200 hours.

  • 1900071151 Atlas Copco Centrifugal Air Compressor Controller Regulator Accessories of Centrifugal ZH10000

    1900071151 The working principle of the regulator for Atlas Copco centrifugal air compressor ZH10000: The inlet regulating vane mechanism adjusts the air flow and pressure entering the compressor by changing the angle of the vane. It can maintain a constant pressure within the adjustable range. This mechanism is installed within an effective range of 1-1.5 times the pipe diameter from the impeller. It can save a significant amount of energy within the adjustable range of 65% - 100% of the air volume.

  • 3001160217 Atlas Copco Air Compressor Spare Parts KIT MOTOR OVERHAUL

    Common models Different models of Atlas Copco air compressors correspond to different overhaul kit models. For example, the overhaul package for the ZT110 - 145 + IMD300 Atlas oil-free air compressor has the model 3001160217. The overhaul kits for the ZR110 - 145 and ZT110 - 145 models of air compressors have models such as 8000-hour overhaul kits.

  • 2901300401 Atlas Copco FILTER KIT UD 9+ FOR AIR TREATMENT EQUIPMENT

    For the maintenance of UD 9 + from Atlas Copco, it is recommended to replace the filter elements at the specified intervals as per the equipment manual. During the replacement process, it is necessary to first depressurize the system and have it operated by professionals to ensure safety and installation quality. Specific information such as filtration accuracy, applicable equipment models, and procurement channels.

  • 3001500651 Atlas Copco air Compressor Machines Original Kit Service 4000H

    Using the original Atlas Copco kit for maintenance can ensure that the compressor maintains the same performance and reliability as a new unit, as these original parts are specifically designed for air compressors and can guarantee that the equipment reaches the desired performance level, improving the machine's availability and service life. If you need more accurate kit contents and detailed information, it is recommended to provide the specific model and serial number of the air compressor so that the precise kit configuration can be queried through the official Atlas Copco channels.

  • Original 3002600350 Atlas Copco MOTOR NON DRIVE SIDE KIT FOR OIL INJECTED SCREW COMPRESSORS

    Maintenance for the non-driven side motor components of Atlas Copco oil-injected screw compressors Regular inspection Observe whether there is oil leakage or seepage at the non-driven side end cover ， check for abnormal temperature rise， and use a sound detector to determine if there is any abnormal noise. Check the tightness of the end cover bolts to ensure reliable sealing. Bear maintenance Replace the bearing lubricating grease according to the cycle specified in the motor manual， clean the bearing chamber， and avoid mixing new and old lubricating grease. When replacing the bearings， ensure the model is matched， and install them using heat fitting or special tools to avoid damaging the bearings by knocking. Sensor calibration Regularly calibrate the temperature sensor to ensure detection accuracy； check if the connection terminals are oxidized or loose， and clean or tighten them if necessary. Heat dissipation maintenance

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept