China 2906081300 Manufacturer, Supplier, Factory

all products are sourced directly from authorized retailers in the Belgium, Germany, China. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

ATLAS COPCO GA160 Operating Instructions Before operation, please read the equipment manual to avoid mistakenly modifying critical parameters (such as excessive pressure limit). When a red fault alarm occurs, stop the machine for inspection first, eliminate the fault, and then restart it. Regularly clean the control panel to prevent dust or oil stains from affecting the sensitivity of the buttons.

Atlas Copco 1901067022,The function of the oil suction valve of Atlas Copco air compressors: The oil suction valve is a key component of the lubrication system of air compressors. Its core function is to ensure the smooth supply of lubricating oil and maintain the stability of the system. By controlling the intake of lubricating oil, through opening or closing actions, it regulates the flow of lubricating oil entering the suction pipeline from the oil tank, ensuring that the friction parts such as the rotor and bearings of the air compressor receive sufficient lubrication. Preventing oil backflow, when the air compressor is shut down or unloaded, the oil suction valve closes, preventing the high-pressure lubricating oil in the oil tank from flowing back through the suction pipeline to the oil tank, avoiding waste of oil and system contamination. Maintaining system pressure, in coordination with pressure maintaining valves and other components, maintaining the stable pressure in the oil and gas tank, providing continuous pressure support for the lubrication system, ensuring that the lubricating oil can be smoothly transported to all lubrication points. Filtering impurities to protect equipment, some oil suction valves are equipped with filters or used in combination with suction filters to filter metal particles, dust impurities in the lubricating oil, preventing them from entering the air compressor main unit, reducing component wear.

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering Catch Cans, the AOS-R (Air Oil Separator, Return) is responsible for keeping blow-by oil and other pollutants out of the air intake, intercooler, manifold, etc. The main difference is that an AOS-R system returns oil back into the pan above the oil level. This permits a service-free system.

The maintenance significance of the check valve stem adjustment kit for Atlas Copco ZT55-90 series air compressors Precise valve stem adjustment can ensure that the intake valve fully opens when loaded and fully closes when unloaded, directly affecting the volumetric efficiency and energy consumption of the compressor. Regular inspections can help detect valve stem wear or jamming issues in advance, avoiding unit shutdown or overload damage to core components due to failure of the intake valve. When choosing, it is recommended to prioritize the use of Atlas Copco original kit to ensure that the component size, material, and model fully match the ZT55-90 series, guaranteeing the adjustment effect and equipment operation reliability.