China 2906049900 Manufacturer, Supplier, Factory

Regularly replacing the Atlas Copco original oil separator kit is crucial for maintaining the efficient and stable operation of the GA90-110(W) series air compressors. It can reduce the failure rate, extend the equipment lifespan, and ensure the quality of compressed air.

Atlas Copco 2901099800 is a 500-hour, 1000-hour, and annual maintenance kit, including air filters, oil filters, oil-gas separators filter elements, lubricating oil / coolant, O-rings, and gaskets.

Common faults and maintenance of the electromagnetic valves in Atlas Copco oil-separation type air compressors: The valve core may get stuck due to accumulated oil, or the sealing parts may age and cause leakage, which will affect the efficiency of oil-gas separation. Regular inspection and cleaning are necessary. If the valve fails to operate properly, check whether the power supply is normal and if the valve body is blocked. When replacing, it is essential to use the original factory electromagnetic valves to ensure compatibility with the oil-gas separation system and avoid excessive oil content in the compressed air or abnormal operation of the equipment.

Purchase Recommendation The 55℃ temperature control valve is a specific parameter component. It is recommended to purchase it through our authorized dealers, providing the specific model of the air compressor (such as G55, GA55, etc.) and the original valve part number to ensure the acquisition of matching original factory parts. Non-original factory valves may have temperature setting deviations or compatibility issues, affecting the temperature control accuracy and equipment safety. Although this valve is not common, it is crucial for ensuring the stable operation of the air compressor under specific conditions. Attention should be paid to maintenance and the accuracy of the parts.

Key points for installation and maintenance of the check valve assembly of Atlas Copco oil-free compressors: During installation, it is necessary to assemble in accordance with the flow direction indicated by the valve body arrow. Reverse installation will cause abnormal system pressure. The oil-free system has high requirements for cleanliness. Before installation, the interfaces must be cleaned to avoid impurities from entering. When replacing the sealing parts, only original oil-free specific accessories from the manufacturer should be used. Ordinary lubricating oil is prohibited (it will contaminate the compressed air). Regular inspection (suggested every 2000 operating hours): If there are abnormal sounds during opening/closing, leakage, or excessive pressure loss, the valve core wear or spring elasticity should be checked and disassembled for inspection.

Atlas Copco 2202207986 is made of high-strength cast iron and steel. It has sufficient rigidity and wear resistance, and is suitable for the long-term high-speed operation range of 500 - 3000 rpm of the machinery.