China 2906040500 ZR/ZT110-145 HP DISCH SIL KIT Manufacturer, Supplier, Factory

ATLAS COPCO WSD15 Its core features typically include: An air-driven design, suitable for working conditions that require high power output and have a demand for portability, especially in environments without power supply or where explosion prevention is necessary. 15 may represent parameters related to specifications, such as the diameter of the grinding wheel (e.g. 150mm), which should be referred to in the product manual. It usually has an ergonomic handle to reduce fatigue during long operations. It may be equipped with adjustable speed function or safety locking device to enhance operational safety and flexibility.

1621875099 Atlas Copco filter material: Usually, it uses ultra-fine glass fiber composite filter material from the US HV Company or pure wood pulp filter paper from the Korean Ahlstrom Company. These filter materials have excellent filtering performance and can effectively retain impurity particles of 10-15 microns. 1621875099 The filtration accuracy of Atlas Copco is generally 10-15 micrometers, with a filtration efficiency of approximately 99%. The working temperature range is usually between -10℃ and 100℃, and the working pressure can reach 1.6 MPa.

Using the original Atlas Copco kit for maintenance can ensure that the compressor maintains the same performance and reliability as a new unit, as these original parts are specifically designed for air compressors and can guarantee that the equipment reaches the desired performance level, improving the machine's availability and service life. If you need more accurate kit contents and detailed information, it is recommended to provide the specific model and serial number of the air compressor so that the precise kit configuration can be queried through the official Atlas Copco channels.

Replacement and selection suggestions for flat washers of Atlas Copco air compressors When replacing, it is necessary to strictly match the original specifications to avoid sealing failure or connection loosening due to size mismatch. For high-pressure, high-temperature or areas in contact with compressor oil, it is recommended to use original factory metal flat washers to ensure that the material is oil-resistant and pressure-resistant. If it is a critical sealing part (such as the end cover of the oil-gas separator), check whether the surface of the washer is flat, without scratches or deformation. If necessary, replace the new part to ensure the seal. For specific models or part numbers, you can refer to the parts manual of the air compressor (usually identified by a numerical code, such as 0650 series, 1622 series), or consult the Atlas Copco after-sales service for the equipment model to obtain precisely matched parts.

Replacement Precautions Before installation, clean the oil stains and impurities on the interface surface to avoid scratching the sealing ring. Ensure a proper installation to avoid distortion or excessive stretching, which may affect the sealing effect. It is recommended to conduct regular checks and replace it in a timely manner according to the usage environment (such as humidity, temperature, and medium). Generally, it is advisable to replace it synchronously with the equipment maintenance cycle.

Atlas Copco Check Valve Kit Common Faults and Maintenance Leakage: This is often caused by worn sealing surfaces, debris blocking, or failed springs. It requires disassembly for cleaning, grinding the sealing surfaces, or replacing the components. Stalling: Oil and impurities in the compressed air may cause the valve core to get stuck. Regular checks and cleanings should be conducted, and air filters should be maintained more frequently. Strange noises: Collisions between the valve core and the valve seat or loose springs may produce noises. The tightness of the components and wear conditions should be checked. Regularly (suggested every 2000-3000 hours of operation) inspecting, cleaning, and conducting performance tests on the check valve assembly of Atlas Copco Check Valve Kit is an important measure to ensure the efficient operation of screw machines.