China Atlas Copco 2906040500 Manufacturer, Supplier, Factory

Atlas Copco 2906037800，The intermediate cooler of the air compressor is an important component of the compressor unit, primarily responsible for three core functions: heat exchange, temperature control, and system protection. The cooling and heat dissipation process reduces the temperature of the high-temperature compressed air discharged by the primary compressor from 186°C to around 54°C, providing suitable temperature conditions for the secondary compression stage. It also cools the liquid temperature before it enters the main expansion mechanism, reducing throttling losses. It enhances the compression efficiency. It enables isothermal compression, optimizes compression efficiency, ensures the outlet pressure and temperature indicators, reduces heat loss, and improves the overall operational efficiency of the unit. System protection prevents the exhaust temperature from exceeding the allowable value due to excessively high suction temperature at the high-pressure stage, providing an oil separation function to separate the oil and moisture in the compressed air.

The air compressor oil separator is a crucial component in the air compressor system, used to separate oil droplets and oil mist from the compressed air. It ensures the purity of the compressed air and enables the recycling and reuse of the lubricating oil.

ATLAS COPCO 1621049600 Maintenance and Replacement: During regular maintenance of the air compressor, it is necessary to check the condition of the gaskets. If any deformation, aging, or damage is found, they should be replaced immediately; After disassembly, if the gasket has undergone plastic deformation (such as a metal gasket), even if it is not damaged, it is recommended to replace it to avoid repeated use leading to sealing failure; When replacing, it is necessary to use gaskets of the same specification and material as the original ones. It is prohibited to substitute with different types of gaskets (such as using a rubber gasket instead of a metal gasket). Although the air compressor gaskets are small components, they are crucial for the sealing performance of the system. Choosing the appropriate gaskets and correctly installing and maintaining them can effectively reduce leakage faults, reduce energy consumption, and extend the service life of the air compressor.

Attention for the oil separation filter of Atlas Copco screw air compressor Part compatibility: The original Atlas Copco oil separation core must be used. It features efficient fiberglass or multi-layer filter materials, offering higher separation efficiency and matching the oil and gas tank in size, thus avoiding poor separation effect, excessive pressure difference or equipment damage caused by non-original products. Avoid contamination: During installation, do not touch the internal filter material of the oil separation core to prevent impurities from entering and affecting the filtering effect. Related maintenance: When replacing the oil separation core, it is recommended to also replace the lubricating oil and oil filter to ensure the overall cleanliness of the lubrication system.

Atlas Copco WUX Regulator Valve Maintenance and Precautions Regular Inspection: Observe whether the valve operates smoothly and check for any sticking (possibly caused by oil contamination or impurities); Check the sealing performance. If there is air leakage (such as air flowing through when the valve is closed), replace the sealing element. Cleaning and Calibration: Regularly disassemble and clean the valve core, valve seat, and diaphragm, removing oil stains and carbon deposits; Calibrate the pressure setting value according to the equipment manual to ensure adjustment accuracy (avoid excessive pressure fluctuations). Replacement Suggestions: If the valve cannot be adjusted, has severe air leakage, or suffers mechanical damage, it should be replaced promptly (it is recommended to use original factory parts to ensure compatibility with the compressor control system).

Atlas Copco 2906067800,The Atlas Copco air compressor oil pump is the core component of the lubrication system for air compressors. It ensures the normal operation and long lifespan of the air compressor by providing stable, clean and pressure-appropriate lubricating oil. Its main function is to supply lubricating oil to various bearings and moving parts of the air compressor, playing roles such as lubrication and friction reduction, cooling and temperature reduction, sealing and leak prevention, cleaning and flushing, and vibration reduction and buffering.