China 2906037500 Manufacturer, Supplier, Factory

Working Principle Torque Transmission: The torque output by the motor is transmitted through the outer teeth of the coupling, and then via the inner teeth of the intermediate sleeve to the compressor shaft, achieving power transmission. Flexible Compensation: Axial Offset: The axial clearance between the inner and outer teeth allows for a small amount of axial displacement of the two shafts (typically ±0.5 to ±3mm). Radial Offset: The top of the outer teeth is made into a spherical shape (with the center of the sphere on the axis), allowing for a certain angular deviation between the two shafts (typically ≤1°). Angular Offset: Through the sliding and rolling of the tooth surfaces, the angular errors between the two shafts are compensated. Buffering and Vibration Reduction: The lubricating oil fills between the teeth and can absorb some vibration and impact loads, reducing equipment noise.

Atlas Copco 2200902017 "Wear Kit" Replacement and Maintenance Recommendations Replacement Timing: Triggered by service manual or when pressure difference/temperature abnormalities occur; Replace along with filters and lubricating oil to reduce energy consumption and failure risks. Installation and Sealing: Tighten according to torque, replace all O-rings/ seals, avoid unfiltered air or oil bypass. Recording and Warning: Update maintenance records, activate pressure difference/ hourly/ status indicator and remote alarm to shorten downtime response.

Atlas Copco 1901067022,The function of the oil suction valve of Atlas Copco air compressors: The oil suction valve is a key component of the lubrication system of air compressors. Its core function is to ensure the smooth supply of lubricating oil and maintain the stability of the system. By controlling the intake of lubricating oil, through opening or closing actions, it regulates the flow of lubricating oil entering the suction pipeline from the oil tank, ensuring that the friction parts such as the rotor and bearings of the air compressor receive sufficient lubrication. Preventing oil backflow, when the air compressor is shut down or unloaded, the oil suction valve closes, preventing the high-pressure lubricating oil in the oil tank from flowing back through the suction pipeline to the oil tank, avoiding waste of oil and system contamination. Maintaining system pressure, in coordination with pressure maintaining valves and other components, maintaining the stable pressure in the oil and gas tank, providing continuous pressure support for the lubrication system, ensuring that the lubricating oil can be smoothly transported to all lubrication points. Filtering impurities to protect equipment, some oil suction valves are equipped with filters or used in combination with suction filters to filter metal particles, dust impurities in the lubricating oil, preventing them from entering the air compressor main unit, reducing component wear.

All these filter components must be equipped with original Atlas Copco parts to ensure filtration efficiency and equipment compatibility. During maintenance, it is necessary to check and replace them according to the specified cycle in the equipment manual to avoid equipment failure due to filter failure.

Atlas Copco 2906062200，Pressure regulation and safety protection: Through a rapid exhaust system, when the pressure in the gas storage tank exceeds the set value, it can quickly release the excess gas to prevent system overpressure and potential safety hazards. System reset and maintenance: When the equipment is shut down or undergoing maintenance, the rapid exhaust can quickly empty the gas in the gas storage tank, facilitating the quick reset of the system or conducting maintenance operations. Improve equipment response speed: The rapid exhaust can shorten the pressure recovery time in the gas storage tank, thereby enhancing the response speed and efficiency of the air compressor and related pneumatic equipment. Prevent gas backflow: Some rapid exhaust systems are equipped with one-way valves, which can prevent gas from flowing back to the compressor when the system is shut down, protecting the internal structure of the equipment.

lf you are looking for GENUINE 1635643421 Atlas Copco Motor By China Supplier, you are on the right page. Just feel free to contact us now. Being one of the genuine spare parts online suppliers of air compressors based in China, focusing on serving worldwide international customers.we strives to serve you Atlas Copco genuine Parts and machine at a best discount price