China 2906007100 Atlas Copco Manufacturer, Supplier, Factory

ATLAS COPCO's FILTER KIT DD/DDP 130 + Usage and Maintenance Tips: The filter element should be replaced regularly based on the operating time of the equipment or the monitoring results of the compressed air quality. It is generally recommended to follow the maintenance cycle recommended by ATLAS COPCO to avoid affecting the efficiency of the dryer or causing excessive pressure drop due to clogged filter elements. The replacement process requires closing the relevant air path and releasing the pressure. The operation should comply with safety regulations. It is recommended to be carried out by professionals in accordance with the equipment manual to ensure correct installation.

Working Principle Torque Transmission: The torque output by the motor is transmitted through the outer teeth of the coupling, and then via the inner teeth of the intermediate sleeve to the compressor shaft, achieving power transmission. Flexible Compensation: Axial Offset: The axial clearance between the inner and outer teeth allows for a small amount of axial displacement of the two shafts (typically ±0.5 to ±3mm). Radial Offset: The top of the outer teeth is made into a spherical shape (with the center of the sphere on the axis), allowing for a certain angular deviation between the two shafts (typically ≤1°). Angular Offset: Through the sliding and rolling of the tooth surfaces, the angular errors between the two shafts are compensated. Buffering and Vibration Reduction: The lubricating oil fills between the teeth and can absorb some vibration and impact loads, reducing equipment noise.

The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

If you are looking for Genuine Original 1625213401-1625837101-1630060412 Fan Radial Atlas Copco or any other related fan assemblies part numbers for any Atlas Copco compressors,Taike Trading Co., Ltd. Will provide you the best prices. Based in China, growing to be one of the main online air compressors and spare parts suppliers, our prices are unbeatable, while the quality it 100% genuine original.

Atlas Copco The oil filter and oil separator service kit for the air compressor is a comprehensive accessory set used for the maintenance and servicing of the compressor's oil and gas system. It is mainly used to replace the key filter elements regularly to ensure the cleanliness of the compressor's oil circuit and thorough oil-gas separation, thereby guaranteeing the efficient operation of the equipment and extending its service life.

Atlas Copco Maintenance and Replacement: Regularly inspect the wear, deformation or aging of the special-shaped rings (such as whether the rubber rings have hardened, or if the metal rings have cracks). Replace them immediately if any abnormalities are found. When replacing, it is necessary to use the original or the same specification special-shaped rings. Standard rings cannot be used as substitutes (even if the sizes are close, shape mismatch may still cause functional failure). During the disassembly and installation process, avoid hitting the weak parts of the special-shaped rings (such as thin walls, sharp corners), to prevent deformation and damage. Although the special-shaped rings of the air compressor are not universal, they play an irreplaceable role in special structural parts. Their design and manufacturing need to strictly match the specific requirements of the equipment, and special attention should be paid to precision and directionality during installation and maintenance to ensure the coordinated operation of all complex components of the air compressor.