China 2013400282 Atlas Copco Manufacturer, Supplier, Factory

Maintenance and Replacement Suggestions for Atlas Copco Oil Coolers Regular Cleaning: For air-cooled coolers, clean the dust and oil stains on the fins regularly. For water-cooled ones, check if the water channels are blocked or clogged to ensure the cooling effect. Leak Check: During daily inspections, observe if there are oil stains on the surface and interface of the cooler. If leakage is detected, replace the sealing parts or the entire kit promptly. Replacement Timing: When the cooler shows severe corrosion, large-scale damage to the fins, or internal blockage causing abnormal oil temperature rise , it is recommended to replace the entire kit. Preferentially use Atlas Copco original accessories to ensure compatibility with the unit and cooling performance. The reliable operation of this kit directly affects the energy consumption, stability, and service life of the oil-free air compressor, and is an important guarantee for maintaining the efficient operation of the unit.

Correlation check: When replacing the sealing kit, simultaneously inspect the sealing surfaces of the instrument block for scratches, deformation or corrosion. If necessary, repair or replace the instrument block. Check whether the threads of the related pipelines and sensor interfaces are in good condition to avoid poor sealing due to damaged threads. Although this sealing kit is a small maintenance component, it is crucial to the reliability of the instrument control module.

Notes for Attention Regular inspection: The pressure relief valve should be subject to regular functional checks and calibrations to ensure it operates properly in case of abnormal pressure, preventing failure due to issues such as valve core jamming. Replacement of genuine products: When replacing the pressure relief valve, it is recommended to choose original Atlas Copco spare parts or products from authorized official channels to ensure compatibility with the equipment and safety. Professional installation: The installation process should be carried out by professional technicians to ensure reliable valve connection and sealing, and to meet the pressure specification requirements of the equipment.

Replacement and Maintenance Key Points Replacement Cycle: 4000 - 6000 hours or replace as needed annually; for high dust / high humidity or heavy load conditions, it can be shortened to 3500 - 4000 hours. Installation and Sealing: Install according to the manual torque, replace all O-rings, avoid unfiltered air or oil bypass. Pressure Difference Monitoring: Pay attention to the oil pressure difference and fuel consumption, if it abnormally increases, stop the machine for inspection and replacement. Companion Replacement: It is recommended to replace simultaneously with air filter, oil filter, and lubricating oil to reduce the oil pressure difference and energy consumption.

Regular inspection and maintenance of the ventilation hose for Atlas Copco air compressors: Check if the hose has any cracks, wear, aging or deformation. Inspect the connection points to ensure they are not loose and that the seal is good, with no air leakage. If any damage is found, it must be replaced immediately; otherwise, it will lead to poor heat dissipation, potentially triggering high-temperature alarms, reduced efficiency or even equipment failure. Installation guidelines: When replacing, follow the requirements in the equipment manual. Avoid over-bending or stretching the hose to ensure a smooth ventilation path without any obstructions.

The bearing sleeve of Atlas Copco 1613519400 is made of babbitt alloy and copper alloy, which can withstand the high temperature and high pressure of the air compressor. It is precisely manufactured according to the structure of different models to effectively prevent oil leakage, ensure the accuracy of the rotor, and prevent the consumption caused by friction.