China 1901064285 Atlas Copco Manufacturer, Supplier, Factory

The air compressor oil filter is a key component of the lubrication system of an air compressor. It is mainly used to filter impurities, particles and contaminants in the lubricating oil, ensuring that the lubricating oil entering the compressor meets the cleanliness standards, thereby protecting the internal components of the compressor (such as bearings, gears, rotors, etc.) from wear and damage, and extending the service life of the equipment. Core functions Impurity filtration Intercept solid particles such as metal debris, dust, and carbon deposits, preventing them from circulating into the working components of the compressor. System protection Reduce friction and wear, lower the risk of faults caused by contaminants, and improve the reliability of the compressor. Oil life extension Remove oxidation products and moisture, delay the aging and deterioration of the lubricating oil, and reduce the frequency of oil replacement.

Attention points for Atlas Copco air filter elements: It is essential to use original Atlas Copco filter elements. The filter materials (mostly composite fibers or high-efficiency filter paper) have undergone strict testing, and their filtration efficiency, air permeability, and structural strength all meet the design standards of the corresponding models. Using non-original products may result in poor filtration performance or excessive resistance, which could affect the performance of the unit. After replacement, start the machine and observe whether the intake pressure is normal. Ensure there is no leakage or abnormal resistance.

If you need to purchase the 2906041800 ATLAS COPCO drive shaft sealing kit, please contact us to purchase genuine original parts. Avoid using non-compliant products that may cause leakage and impurities to enter, thereby affecting the normal operation of the air compressor.

Maintenance Recommendations: Regular Inspection: Conduct an inspection every 3-6 months (or as per the equipment manual) to check if the muffler is damaged in appearance, or if the connection parts are loose or leaking air. Cleaning and Replacement: Shorten the maintenance cycle based on the operating environment (such as in areas with high dust or high humidity). In cases of severe blockage, disassembly for cleaning or direct replacement may be necessary. Compliance Replacement: Only use original or certified alternatives to ensure compatibility with the equipment's exhaust volume and pressure parameters, to avoid reduced equipment efficiency or safety hazards due to size mismatch.

Atlas Copco 2901021800 Original: The core control components use original parts to ensure compatibility and reliability with the system. Non-original parts may pose a risk of parameter deviation.

Maintenance Reminder: Check the valve core for any jamming (disassemble for cleaning) and the springs for fatigue every 6 to 12 months. Replace the aging seals in a timely manner. If the pressure rebounds too quickly after depressurization or cannot be completely relieved, investigate whether the valve core seal has failed or if the control signal is normal.