China Atlas Copco 1901064285 Manufacturer, Supplier, Factory

Attention points for replacing the drive components and connecting parts of Atlas Copco GA15VSD screw air compressor When replacing parts such as belts and couplings, original factory parts (such as belt model and coupler specification must match the equipment) should be used. Non-original factory parts may cause transmission abnormalities due to size deviations. During installation, the coaxiality between the motor and the main unit must be ensured (belt transmission allows a small deviation, while coupler transmission requires strict calibration). Otherwise, it will lead to premature wear of bearings and increased vibration. After replacement, a trial run is required to monitor vibration, noise and temperature, and confirm that the drive system is operating normally.

Original Equipment Parts and Replacement Considerations The Atlas Copco gear set is a core component. It is recommended to preferentially use original equipment parts . The advantages of using original equipment parts are as follows: It perfectly matches the parameters of the main unit and the motor, ensuring transmission efficiency The material and processing accuracy meet strict standards, and the lifespan can reach 8-150,000 hours If alternative parts are chosen, the gear module, tooth count, tooth profile , center distance, etc. must be strictly verified to avoid operational failures due to size deviations. In summary, the Atlas Copco air compressor gear set, with its high-precision design and high-quality materials, ensures efficient transmission of the equipment. However, it is necessary to conduct regular maintenance to extend its service life and avoid the entire machine stopping due to gear failures.

Atlas Copco PD145+ Operating Instructions Fuel and Lubricants: Use diesel fuel and dedicated compressor oil that meet specifications. Avoid engine or main unit failures caused by oil quality issues. Regular Maintenance: Follow the manual for regular replacement of filters, checking belt tension, and cleaning the cooling system to ensure stable equipment performance. Pre-start Inspection: Before operation, confirm oil level, water level, tire pressure (or track condition), and check if the pipeline connections are secure to prevent leaks. Environmental Adaptation: In high-altitude or extreme temperature environments, be aware that engine power may be affected. In such cases, take necessary adjustment measures.

If you need to purchase or replace the air compressor head of this model, it is recommended to do so through our Atlas Copco dealers to ensure the authenticity of the parts and the subsequent installation, after-sales support. At the same time, when replacing the air compressor head, professional technicians are usually required to operate to ensure the installation is in accordance with specifications and avoid affecting the normal operation of the air compressor.

Maintenance for the non-driven side motor components of Atlas Copco oil-injected screw compressors Regular inspection Observe whether there is oil leakage or seepage at the non-driven side end cover ， check for abnormal temperature rise， and use a sound detector to determine if there is any abnormal noise. Check the tightness of the end cover bolts to ensure reliable sealing. Bear maintenance Replace the bearing lubricating grease according to the cycle specified in the motor manual， clean the bearing chamber， and avoid mixing new and old lubricating grease. When replacing the bearings， ensure the model is matched， and install them using heat fitting or special tools to avoid damaging the bearings by knocking. Sensor calibration Regularly calibrate the temperature sensor to ensure detection accuracy； check if the connection terminals are oxidized or loose， and clean or tighten them if necessary. Heat dissipation maintenance

1617965500 Atlas Copco Installation Location: The filter element can be installed at any position in the compressed air system. It can be standardly equipped on the after-cooler and is highly flexible to use. It can effectively protect the compressed air system as well as components such as dryers and filters.