China 1625752501 Manufacturer, Supplier, Factory

Attention for the temperature control valve of Atlas Copco air compressors: The set value of the temperature control valve is preset at the factory and should not be adjusted by non-professionals without permission, as it may affect the safety of the equipment. When replacing, the specific model of the air compressor (such as GA37, G75, etc.) needs to be provided to ensure the compatibility of the accessories. It is recommended to purchase through official after-sales or authorized channels to avoid secondary faults caused by inferior accessories. Reasonable maintenance of the temperature control valve can effectively extend the service life of the air compressor, reduce energy consumption, and is an indispensable part of the daily maintenance of the equipment.

Maintenance and Fault Handling of the Oil Temperature Electronic Elektronikon Control Module of Atlas Copco Air Compressors If there are abnormal oil temperature readings, the heating/cooling system does not respond, or the oil temperature protection is triggered frequently, it may be related to this control module. Maintenance suggestions: First, check whether the oil temperature sensor and connection lines are normal. Eliminate front-end signal faults; If the module itself is faulty, it is recommended to replace the original factory parts to ensure control performance. After replacement, calibration of parameters through special tools is required to make it match the model; Regularly check the module status through the self-check function of the Elektronikon system to promptly detect potential problems.

1614727399 Large industrial screw machines may require replacement every 2,000 - 4,000 hours (in conjunction with oil quality testing); Miniature compressors (such as those for laboratories) may need to be replaced every 500 - 1,000 hours. It is essential to follow the manual and avoid equipment damage due to mismatched cycles.

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Atlas Copco air compressor sensor kit replacement and usage precautions: Sensor replacement should be carried out by professional technicians. Wiring and calibration must be done in accordance with the equipment manual specifications to ensure correct signal transmission. Before installation, the sensor installation position should be cleaned to avoid the influence of oil stains, dust, etc. on measurement accuracy. It is recommended to calibrate the sensors regularly (according to the equipment maintenance cycle) to ensure their measurement accuracy and extend their service life.

The oil filter models corresponding to different models of the XAS series air compressors vary. Common oil filter models include 1613610500, 97125402, 9709003400, 9710009801, 1613610500, etc. (The specific model needs to be determined according to the specific model of the air compressor.)