China 1621490618 Manufacturer, Supplier, Factory

ATLAS COPCO "8000 Hours Service Maintenance Kit" Purchase and Replacement Key Points Verify "Model + Serial Number" to confirm the part number with the service manual and the spare parts list. Prefer original factory or certified accessories. Replace according to the steps in the service manual. Pay attention to torque, sealing, exhaust and fluid replenishment procedures. After completion, record and reset the maintenance timer. In harsh environments or high-load conditions, it can be shortened to 6000 - 7000 hours; pay attention to condensation and drain valve maintenance in humid environments. If abnormal sounds, vibrations, temperature or pressure occur after replacement, immediately shut down the machine for inspection and contact the service team.

Atlas Copco 1625752501 Notes for Attention Original Equipment Advantage: The original equipment corresponding to this part number is fully compatible with the equipment in terms of size accuracy and filtration efficiency, ensuring the best filtration effect and reducing the risk of equipment damage caused by compatibility issues. Confirm Compatibility: Since the same part number may correspond to a specific model, before replacement, it is necessary to check the model and serial number of the air compressor, or consult an authorized Atlas Copco dealer to ensure the compatibility of the parts.

Maintenance Tips for the Outer Shell of Atlas Copco Compressor Oil Filter When replacing the oil filter element, check if there are any impurities or oil stains remaining inside the shell. If necessary, clean it to avoid contaminating the new filter element. When installing, ensure that the sealing parts are in good condition and the end cover or sealing cover is firmly tightened to prevent oil leakage. After long-term use, if cracks, deformation or damaged threads are found on the shell, it is necessary to replace it in time to avoid abnormal oil pressure or safety hazards caused by structural failure.

Common faults and maintenance of the electromagnetic valves in Atlas Copco oil-separation type air compressors: The valve core may get stuck due to accumulated oil, or the sealing parts may age and cause leakage, which will affect the efficiency of oil-gas separation. Regular inspection and cleaning are necessary. If the valve fails to operate properly, check whether the power supply is normal and if the valve body is blocked. When replacing, it is essential to use the original factory electromagnetic valves to ensure compatibility with the oil-gas separation system and avoid excessive oil content in the compressed air or abnormal operation of the equipment.

Atlas Copco Purchase and Usage Recommendations Atlas Copco Model Matching: Select the corresponding kit based on the brand of the oil-free air compressor and the gearbox model (such as transmission power, reduction ratio). Avoid mismatched tool sizes or spare parts specifications. Atlas Copco Original Equipment Manufacturer Priority: It is recommended to choose the maintenance kit certified by the air compressor manufacturer to ensure that the material of spare parts (such as bearing accuracy grade, sealing performance resistance to aging) is consistent with the design standards of the gearbox. Atlas Copco Usage Specifications: Follow the maintenance manual provided with the kit, especially the torque parameters (such as the bolts of the gearbox cover usually require 25-35N·m) and the amount of lubricating grease (excessive may cause temperature rise).

Maintenance points for the solenoid valves of Atlas Copco industrial compressors: Solenoid valves are prone to getting stuck or leaking due to impurities and oil contamination in the compressed air or aging of the seals. Regular inspections and cleanings are necessary. If the valve fails to operate properly, it is necessary to check if the power supply is normal and if the valve core is worn. In case of necessity, the original factory solenoid valves should be replaced to avoid control system failures.