China 1621490618 COOLER Manufacturer, Supplier, Factory

I.Main Components Included in the Set。 Air filter Filters out dust and impurities in the air to prevent them from entering the compressor. It is recommended to replace every 4000 hours to avoid blockage that leads to a decrease in air volume and increased energy consumption. Oil filter Filters impurities in the lubricating oil to protect key components such as bearings and gears. Blockage will cause an increase in oil pressure, triggering a protective shutdown. Oil-gas separator Separates the lubricating oil from the compressed air to ensure that the exhaust contains an acceptable amount of oil (typically ≤ 3ppm). Failure will result in increased fuel consumption, oil in the exhaust, and contamination of the after-treatment equipment. Lubricating oil Synthetic lubricants (such as the SynthOil series from Atlas Copco) provide lubrication, cooling and sealing functions. They need to be replaced every 4,000 hours. Old lubricants will reduce cooling efficiency and increase the risk of carbon deposits. Sealing kit Includes O-rings, gaskets, etc., to prevent leakage of lubricating oil and compressed air. Old sealing parts may cause a decrease in pressure or oil leakage. Other accessories Some packages may include belts (belt drive type), sensors, hoses, etc. II. Advantages of the Maintenance Package One-stop purchase: A single package covers all the replacement needs of key components, avoiding the omission of accessories. Original factory matching: Atlas Copco original accessories ensure perfect compatibility with the equipment, extending the service life. Cost-effectiveness: The package price is usually more favorable than purchasing accessories separately. Professional guidance: A detailed maintenance manual is included, guiding users on how to replace the accessories correctly.

Atlas Copco 2906066000,The air compressor maintenance package protects the design of the air compressor, reduces equipment wear, maintains stability and extends lifespan: The maintenance includes air filters, oil filters, and oil-gas separators, etc. Regularly remove impurities to prevent blockages and ensure proper temperature operation. 2230000800,Original factory parts maintenance can avoid performance degradation and equipment damage of original factory parts, reduce the risk of thermal shutdown, and extend the overall lifespan. The entire maintenance package has a lower price and can be purchased in bulk. It optimizes inventory management and reduces costs caused by downtime.

Atlas Copco EWD330 Electronic Drain Valve Maintenance Recommendations Compatible Models: This product is only applicable to Atlas Copco EWD330 electronic drain valves. Before purchase, confirm the production batch and electromagnetic valve specifications of the drain valve to avoid model mismatch. Maintenance Timing: When the drain valve shows slow operation, abnormal drainage (such as no drainage or continuous drainage), abnormal noise from the electromagnetic valve, or air leakage, it may be necessary to repair the electromagnetic valve. At this time, this kit can be used to replace the worn parts. Installation Notes: It is recommended to operate by professionals. Before maintenance, cut off the power and gas sources, assemble in accordance with the original factory manual specifications, ensure that the components are installed properly, and avoid functional failures or safety hazards due to improper assembly.

AIR FILTER ELEMENT 1094 8070 99 is a critical part of Compressor, made of high quality raw materials in state of the art manufacturing facility. Ensuring high performance output and enhanced life of Compressor and parts. All parts undergo stringent quality control by experienced technicians and engineers.

Atlas Copco PD145+ Operating Instructions Fuel and Lubricants: Use diesel fuel and dedicated compressor oil that meet specifications. Avoid engine or main unit failures caused by oil quality issues. Regular Maintenance: Follow the manual for regular replacement of filters, checking belt tension, and cleaning the cooling system to ensure stable equipment performance. Pre-start Inspection: Before operation, confirm oil level, water level, tire pressure (or track condition), and check if the pipeline connections are secure to prevent leaks. Environmental Adaptation: In high-altitude or extreme temperature environments, be aware that engine power may be affected. In such cases, take necessary adjustment measures.

Maintenance suggestions for the linkage components of Atlas Copco air compressors Regularly check the tightness of the linkage components (such as coupling bolts, belt tension), to prevent eccentricity or slippage due to loosening. Observe for any abnormal vibrations, unusual noises or temperature increases, which may indicate wear or poor fit of the linkage components. Replace the wear-prone parts (such as coupling elastomers, belts) according to the maintenance schedule to ensure transmission efficiency and safety.