China Genuine Atlas Copco Manufacturer, Supplier, Factory

Procurement and adaptation confirmation of Atlas Copco air compressor spare parts 1635316600: It is recommended that we purchase the original spare parts through Atlas Copco to ensure that the size and filtering accuracy match the equipment. If you need to confirm whether it is compatible with your air compressor, please provide the complete model and serial number of the equipment and contact us for further verification.

1622908920 The internal structure of the Atlas Copco check valve is equipped with a valve core, which only allows the lubricating oil to flow in the preset direction. When the oil flow direction is reversed, the valve core will automatically close the channel to prevent backflow. When the compressor stops, the oil pressure in the system drops sharply. Without the 1622908920 Atlas Copco check valve, the lubricating oil may flow in the opposite direction due to gravity or residual system pressure, causing the internal components of the main unit and bearing parts to experience dry friction when the compressor starts up again, thereby accelerating wear.

First separation: The oil-gas mixture containing various-sized oil droplets, which comes out from the exhaust port of the air compressor main unit, enters the oil-gas tank. Most of the oil in the oil-gas mixture falls to the bottom of the tank under the action of centrifugal force and gravity. Second separation: The compressed air containing oil mist passes through the micrometer and fiberglass filter material layers of the oil-gas separation filter element for secondary separation. The oil particles undergo mechanisms such as diffusion, direct interception, and inertial collision aggregation, causing the suspended oil particles in the compressed air to quickly coalesce into large oil droplets. Under the action of gravity, the oil gathers at the bottom of the oil separation element and returns to the main lubricating oil system through the bottom concave area of the secondary return oil pipe inlet, thereby enabling the air compressor to discharge more pure and oil-free compressed air.

Notes for Attention Regular inspection: The pressure relief valve should be subject to regular functional checks and calibrations to ensure it operates properly in case of abnormal pressure, preventing failure due to issues such as valve core jamming. Replacement of genuine products: When replacing the pressure relief valve, it is recommended to choose original Atlas Copco spare parts or products from authorized official channels to ensure compatibility with the equipment and safety. Professional installation: The installation process should be carried out by professional technicians to ensure reliable valve connection and sealing, and to meet the pressure specification requirements of the equipment.

Attention points for replacing the drive components and connecting parts of Atlas Copco GA15VSD screw air compressor When replacing parts such as belts and couplings, original factory parts (such as belt model and coupler specification must match the equipment) should be used. Non-original factory parts may cause transmission abnormalities due to size deviations. During installation, the coaxiality between the motor and the main unit must be ensured (belt transmission allows a small deviation, while coupler transmission requires strict calibration). Otherwise, it will lead to premature wear of bearings and increased vibration. After replacement, a trial run is required to monitor vibration, noise and temperature, and confirm that the drive system is operating normally.

1621896000 Atlas Copco Air Compressor Spare Parts Centrifugal Oil Filter Element Procurement and Use Suggestions: As a key filtering component, it is recommended to use original spare parts (No. 1621896000) to ensure filtering accuracy and size matching, and to avoid early wear and tear of the equipment caused by poor filtering effect of secondary components. When replacing, it is necessary to follow the equipment maintenance procedures to ensure good installation sealing and prevent unfiltered oil from bypassing. If you need to confirm whether it is compatible with your air compressor, please provide the complete model and serial number of the equipment and contact us.