China WSD80 Manufacturer, Supplier, Factory

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc. Preventing oil passage blockage: Prevent impurities from accumulating in the oil passage, ensure the smoothness of the oil passage, enable the lubricating oil to circulate normally, provide sufficient lubrication and cooling for each component, and prevent problems such as overheating shutdown caused by insufficient oil supply.

Atlas Copco Maintenance and Replacement: Regularly inspect the wear, deformation or aging of the special-shaped rings (such as whether the rubber rings have hardened, or if the metal rings have cracks). Replace them immediately if any abnormalities are found. When replacing, it is necessary to use the original or the same specification special-shaped rings. Standard rings cannot be used as substitutes (even if the sizes are close, shape mismatch may still cause functional failure). During the disassembly and installation process, avoid hitting the weak parts of the special-shaped rings (such as thin walls, sharp corners), to prevent deformation and damage. Although the special-shaped rings of the air compressor are not universal, they play an irreplaceable role in special structural parts. Their design and manufacturing need to strictly match the specific requirements of the equipment, and special attention should be paid to precision and directionality during installation and maintenance to ensure the coordinated operation of all complex components of the air compressor.

Atlas Copco 2906016400,During the cooling process, water vapor, oil mist and carbon dioxide and other impurities in the air condense into liquid form and are discharged through the steam trap, thereby improving the quality of the compressed air. This prevents damage to the internal components of the compressor due to high temperatures, extending the equipment's lifespan. At the same time, it reduces the increase in energy consumption caused by high temperatures. By pre-cooling, the load on subsequent equipment (such as dryers) is reduced, energy consumption is decreased, and the overall system efficiency is improved. In scenarios where gases such as oxygen and nitrogen need to be separated, pre-cooling the air helps to increase the purity and processing efficiency of the gases.

The non-driven side motor assembly of the Atlas Copco oil-injected screw compressor is the part of the motor that is separated from the connection end of the compressor main body. Although it does not directly participate in power transmission, its structure and performance are of vital importance to the overall operational stability, heat dissipation effect, and safety of the equipment of the motor.

If you are searching for 1622507380 AIR FILTER – Atlas Copco China Supplier, You are Come to the right place. Taike provide you Genuine Original Atlas Copco Air Filter and Other’s Parts. GA30, GA37, GA45+basically use this air filter. The air filter assembly is 1622507380=1622507300, and the internal filter element is 1613740800=1613740700. Check the blow is specific data for you to cross-check.
Product name: Air Filter
Part Number:1622507380; 1622 5073 80; 1622-5073-80
Brand: Atlas Copco
Quality Level: Genuine Original
Atlas Copco Leading Delivery Time: 3-7 working days (if there is stock)
Price: Negotiable, and discounted prices are upon instant inquiry.
The picture Are Only for Reference.

Atlas Copco 2906025000,Air filter element: Filters dust and particles in the inhaled air. After replacement, it can prevent impurities from entering the main unit cavity and prevent rotor wear and blockage. Oil filter: Filters metal debris, gums and other impurities in the lubricating oil. After replacement, it can keep the oil clean and avoid oil blockage in the oil circuit. Oil-gas separator core: Separates the liquid oil carried in the compressed air. After replacement, it can ensure that the exhaust oil content is ≤ 3ppm (in line with industrial standards), avoiding oil contamination of downstream equipment. Lubricating oil: Lubricates the rotating parts such as the rotor and bearings of the main unit. After replacement, it can reduce friction loss, remove heat generated during operation, and prevent damage from high temperatures.