China Water Lever Transducer Manufacturer, Supplier, Factory

Atlas Copco 0663716702,The sealing function is bidirectional. As a bidirectional sealing element, the initial compression amount during installation in the radial or axial direction determines the initial sealing capacity. The force generated by the system pressure acting on the O-ring is the total sealing force, and this sealing force increases as the system pressure rises. The leak-free sealing can achieve absolute leak-free sealing as long as the O-ring has an initial pressure. Buffering and shock absorption. By utilizing the elasticity of rubber to absorb mechanical vibrations or impacts, the rigidity collision between components is reduced. It buffers the vibration during engine operation and avoids interface loosening. System protection prevents dust, particles, water or corrosive substances from entering the equipment interior, protecting precision components. It plays a waterproof sealing role in electronic equipment and prevents rainwater or moisture from invading the circuit board.

Maintenance notice for the oil filter housing of Atlas Copco air compressor 1117021 A52D: When replacing the filter element of the oil filter, it is necessary to check whether the sealing parts (such as O-rings) of this housing are in good condition. If there is aging or damage, they should be replaced in time to avoid oil leakage. During installation, it is necessary to tighten according to the specified torque to ensure the sealing performance.

When performing maintenance and replacement, it is recommended to refer to the official maintenance manual of the air compressor to confirm the specifications and parameters of the O-ring. Obtain the original accessories through our official channels to ensure the sealing effect and the operational reliability of the equipment, and avoid problems such as leakage and equipment failure caused by incompatible parts.

First separation: The oil-gas mixture containing various-sized oil droplets, which comes out from the exhaust port of the air compressor main unit, enters the oil-gas tank. Most of the oil in the oil-gas mixture falls to the bottom of the tank under the action of centrifugal force and gravity. Second separation: The compressed air containing oil mist (particles with a diameter of 1 micron or less) passes through the micrometer and fiberglass filter material layers of the oil-gas separation filter element for secondary separation. The oil particles undergo mechanisms such as diffusion, direct interception, and inertial collision aggregation, causing the suspended oil particles in the compressed air to quickly coalesce into large oil droplets. Under the action of gravity, the oil gathers at the bottom of the oil separation element and returns to the main lubricating oil system through the bottom concave area of the secondary return oil pipe inlet, thereby enabling the air compressor to discharge more pure and oil-free compressed air.

Atlas Copco 2908850000,The functions of Atlas Copco lubricating oil include: lubrication and friction reduction, which form a protective film between moving parts, reducing direct metal contact, lowering friction resistance, and extending equipment lifespan. Cooling and heat dissipation absorb and remove the heat generated during compression, preventing equipment from overheating and ensuring efficient operation. Sealing and protection prevent gas leakage, dust intrusion, and cross-contamination, while protecting the metal surface from oil deterioration or external erosion. Cleaning and rust prevention carry and deposit impurities, maintaining internal cleanliness; the rust inhibitor components can protect metals from oxidation. Buffering and stress dispersion mitigate shock and vibration, distribute load, and enhance system stability.

Atlas Copco 1630027906,Filtering and Purification Function: The air filter removes impurities from the air entering the air compressor to ensure the quality of the compressed air. The oil filter removes impurity particles from the lubricating oil to keep it clean and prevent metal particles, dust, etc. from entering the main unit. The oil-gas separator separates the lubricating oil from the compressed air to ensure the recycling of the lubricating oil and reduce the oil content in the compressed air. Lubrication Protection Function: The lubricating oil lubricates the internal parts of the air compressor, reducing friction and wear between parts and having good cooling performance. It forms a protective film on the surface of high-speed rotating components, preventing moisture and impurities from invading and protecting the internal parts from corrosion. System Protection Function: Prevent equipment damage by regularly replacing consumables to avoid overload and damage of the equipment due to clogged filter elements. Extend Service Life: By effective filtering and lubrication, significantly extend the service life of the air compressor main unit.