China Seal Manufacturer, Supplier, Factory

Atlas Copco Z160-275 transmission shaft bearing kit usage and maintenance precautions: When replacing, it must be operated by professional technicians. Follow the steps in the equipment maintenance manual strictly to ensure that the bearings are installed properly and the clearance is adjusted reasonably. Before installation, clean the transmission shaft and bearing housing, and check whether the relevant mating surfaces are intact to avoid impurities or damage affecting the bearing lifespan. It is recommended to conduct regular inspections in combination with the overall maintenance cycle of the equipment. If abnormal bearing noise or abnormal temperature rise is detected, the kit should be replaced promptly.

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc.

The GA90 and GA110VSD screw air compressors from Atlas Copco are equipped with various filter component replacement and purchase suggestions. Model matching: It is essential to use Atlas Copco original or certified filter components (you can query the corresponding model by the equipment serial number). Non-original accessories may cause equipment failure due to non-compliant size and material. Replacement cycle: Refer to the equipment manual and make a comprehensive judgment based on operating hours, environmental dust concentration, oil quality status, etc. In harsh environments, the cycle should be shortened. Purchase channel: Through Atlas Copco, we ensure genuine products and after-sales service.

Attention for the suction control valve of Atlas Copco air compressors: After replacing or repairing the suction control valve, it is necessary to recalibrate the pressure setting value to ensure it matches the system requirements. Avoid using non-original factory parts to prevent abnormal operation of the compressor due to size deviations or material issues.

The air compressor maintenance kit is a set of components designed to facilitate the maintenance and repair of air compressors. It usually includes wear parts, standard parts and specialized tools specific to a certain model or series of air compressors, which can simplify the maintenance process and ensure compatibility of the accessories.

Atlas Copco Air compressor Roller Bearing Main Types and Application Scenarios Spherical roller bearings Applicable to: Rotating components such as motor rotors and fan shafts that mainly bear radial loads. Features: Simple structure, low friction coefficient, capable of simultaneously bearing certain radial and axial loads, and allowing higher rotational speeds. Cylindrical roller bearings Applicable to: Parts that bear large radial loads, such as crankshafts. Features: Strong radial load-bearing capacity, large contact area between the rolling elements and the raceways, suitable for high-load conditions, but not suitable for bearing axial loads. Angular contact ball bearings