China 2901062200 SET OF SEALS Manufacturer, Supplier, Factory

What is the fundamental cause of the damage to the coupling? The fundamental cause of the damage to the coupling lies in the mismatch between the design, installation, maintenance and actual working conditions. By correctly selecting the type, conducting standardized installation, performing regular maintenance and optimizing the working conditions, the service life of the coupling can be extended from 1 to 2 years to 5 to 10 years, significantly reducing the risk of downtime and maintenance costs. It is recommended to establish a full life cycle management file for the coupling, recording the data from each maintenance, to achieve preventive maintenance.

The high-pressure rotor replacement kit of Atlas Copco is mainly applicable to equipment such as high-pressure compressors of the Atlas Copco brand. When the high-pressure rotor of the equipment is worn out, damaged or reaches a certain service life, which affects the normal operation and compression efficiency of the equipment, this kit can be replaced to restore the performance of the equipment.

ATLAS COPCO "8000 Hours Service Maintenance Kit" Purchase and Replacement Key Points Verify "Model + Serial Number" to confirm the part number with the service manual and the spare parts list. Prefer original factory or certified accessories. Replace according to the steps in the service manual. Pay attention to torque, sealing, exhaust and fluid replenishment procedures. After completion, record and reset the maintenance timer. In harsh environments or high-load conditions, it can be shortened to 6000 - 7000 hours; pay attention to condensation and drain valve maintenance in humid environments. If abnormal sounds, vibrations, temperature or pressure occur after replacement, immediately shut down the machine for inspection and contact the service team.

Maintenance Points Regularly replace the filter element: Based on the usage environment and operating time (generally recommended every 2,000-4,000 hours) , replace the filter element to avoid increased pressure loss and reduced filtering effect due to blockage. Pressure difference monitoring: Some models are equipped with a pressure difference indicator. When the filter element becomes clogged to a certain extent, it will give a prompt, and it is necessary to replace it in time to ensure the normal operation of the system. Sealing check: Regularly check the interface sealing condition of the filtering component to prevent unfiltered compressed air from leaking into the downstream system. If you need to purchase filter elements or want to know about specific compatible models, it is recommended to refer to the PD295 filtering component technical document provided by Atlas Copco officially, or provide the detailed model of the air compressor (such as GA37, GA55)

6229031700 The non-return valve C77 of the oil-injected screw compressor from Atlas Copco reduces the impact of the backflow airflow on the internal components of the compressor, such as rotors and bearings, thereby extending the service life of the equipment.

Installation and Maintenance Instructions Oil pipes inside the unit: Replace after shutdown, depressurization and cooling; Record the direction and connection sequence, clean the interfaces, assemble according to the specified torque; Recheck the pressure drop and leakage after operation. Gas pipelines: Avoid excessive bending / stretching and dragging on the ground; Regularly inspect the joints and wear; Perform a gas tightness test when necessary.