China PD145+ Manufacturer, Supplier, Factory

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

2205684100 Drain Valve: This automatic drainage valve provides a fully automatic drainage function for the water collected at the lower level of the compressed air system. Its maximum working pressure is 20 bar, and the drainage capacity is 0.88 US gallons per minute. The interface is G1/2.

The high-pressure rotor replacement kit of Atlas Copco is mainly applicable to equipment such as high-pressure compressors of the Atlas Copco brand. When the high-pressure rotor of the equipment is worn out, damaged or reaches a certain service life, which affects the normal operation and compression efficiency of the equipment, this kit can be replaced to restore the performance of the equipment.

Purchase Recommendation If you need to make a purchase, please provide the model number of the air compressor (such as GA55, GX15), the serial number, and the installation position of the solenoid valve (such as the intake valve, the discharge valve). Obtain precise parts from an officially authorized dealer or after-sales service center. Using non-original factory parts may lead to control failure, equipment malfunction, and even affect the overall warranty of the machine. The stable operation of the solenoid valve is the foundation of the automatic control of the air compressor. Regular inspections and timely replacements can significantly reduce the equipment failure rate and ensure gas production efficiency.

The Function and Importance of Atlas Copco Air Compressor Motor Shock Absorbers Protecting Equipment: Reduces the impact of motor vibration on the main unit, pipelines, and instruments of the air compressor, and reduces the wear of components such as bearings and couplings. Reducing Noise: Blocks the transmission path of vibration, reducing the equipment operation noise by 10-20 dB(A), meeting the environmental protection standards for workshop noise. Stable Operation: Avoids pipe loosening and instrument malfunction caused by vibration, ensuring the stability of the compressed air output pressure. Choosing the appropriate shock absorber spare parts from Atlas Copco and conducting regular maintenance is an important measure to ensure the long-term stable operation of the air compressor motor.

The impact of filter oil system failure in Atlas Copco air compressors If the filter elements fail or are not maintained properly, it may lead to: Excessive oil content in compressed air, contaminating downstream equipment or products (especially having a significant impact on industries such as food and medicine). Increased impurities in lubricating oil, accelerating wear of components such as rotors and bearings, and shortening the equipment's lifespan. Excessive differential pressure in the oil-gas separator, increasing energy consumption and even causing the system to overload and shut down.