China Industrial Compressor Parts Manufacturer, Supplier, Factory

Key structural design Air intake: Gradually expanding or tangential design, reduces flow velocity and separates large particle impurities. Filter element installation: Vertical or horizontal installation, facilitating replacement and maintenance. Drainage structure: Gravity drainage port or automatic drainage valve, prevents condensate water from soaking the filter element. Sealing design: Uses nitrile rubber or fluorine rubber sealing rings, with compression ratio of 15% to 25%. Quick disassembly structure: Snap-fit or bolt connection, simplifies maintenance procedures.

Maintenance related: Atlas Copco has the 8000H maintenance kit, such as the air/oil filter kit with part number 2903752600, which is suitable for Atlas Copco air compressors and includes air filters, oil filters, O-rings and other components. There are also 8000H maintenance kits of models like 1625752600 2903752600 etc., used for fixed oil-injection compressors, with a maintenance interval of 8000 hours.

Key Points for Bolt Installation and Maintenance of Atlas Copco Pre-tightening Torque: Appropriate torque should be applied according to the bolt's strength grade and connection requirements . Excessive torque can cause the bolt to break, while insufficient torque may result in poor sealing or loosening. Surface Treatment: The bolt surface is usually galvanized, phosphated , or oxidized . Before installation, check the surface for rust or damage. Cooperation Precision: The cooperation between the bolt and the nut or the bolt hole must comply with standards . Avoid overly loose or overly tight threads. Regular Inspection: After the air compressor has been running for a period of time, check if the bolts are loose. If rust, deformation, or fracture is found, replace the bolts of the same specification and strength in a timely manner.

Model and compatible models: The oil filter kit for Atlas Copco air compressors comes in various models. Some of them are suitable for oil filters of RXD series lubricants, such as 3001160212, which are applicable to air compressors of models like GA5, GA7, GA11, GA7VSD+, GA11VSD+, GA15VSD+, G7, etc.

The Atlas Copco C242 screw air compressor discharge valve repair kit is applicable for maintenance recommendations. Applicable models: Specifically designed for the C242 screw air compressor model. It is necessary to confirm the specific production batch and discharge valve model of the equipment (this can be verified through the equipment serial number or part number). Replacement Timing： When there are abnormal compressor pressure， significant pressure remaining during discharge， slow loading response or abnormal air leakage sounds， etc.， it may indicate that the discharge valve needs maintenance or replacement of components. At this time， this kit can be used for maintenance. Installation note： It is recommended to operate by professional technicians according to the original factory maintenance manual to ensure correct assembly and avoid secondary faults caused by improper installation.

Maintenance Tips for Atlas Copco's Minimum Pressure Valve Regularly check if the valve is leaking (by listening or measuring pressure). If there is a leak, it may be due to worn seals or impurities blocking the mechanism. In such cases, clean or replace the components promptly. When replacing, ensure that the model matches the original factory model to guarantee that the pressure setting value, interface size, and the compressor system are consistent. Avoid poor lubrication or reduced system efficiency due to parameter mismatch. Before restarting after a long shutdown, manually check the flexibility of the valve core to prevent sticking due to oil residue solidification. The Atlas Copco minimum pressure valve, as the "pressure stabilizer" and "check valve" of the compressor oil circuit and gas circuit, is crucial for the safe operation and lifespan of the equipment. It is recommended to use original factory parts to ensure system compatibility and reliability.