China Electronikon Control Module Manufacturer, Supplier, Factory

New jet screw, oil-free screw, centrifugal compressor, ROTZ, screw, centrifugal blower; After treatment dryer, cooling dryer, filter; Pressure swing adsorption nitrogen machine; In addition, controller expansion has been optimized, and energy recovery equipment and over 20 new products will be provided simultaneously.

Maintenance for the non-driven side motor components of Atlas Copco oil-injected screw compressors Regular inspection Observe whether there is oil leakage or seepage at the non-driven side end cover ， check for abnormal temperature rise， and use a sound detector to determine if there is any abnormal noise. Check the tightness of the end cover bolts to ensure reliable sealing. Bear maintenance Replace the bearing lubricating grease according to the cycle specified in the motor manual， clean the bearing chamber， and avoid mixing new and old lubricating grease. When replacing the bearings， ensure the model is matched， and install them using heat fitting or special tools to avoid damaging the bearings by knocking. Sensor calibration Regularly calibrate the temperature sensor to ensure detection accuracy； check if the connection terminals are oxidized or loose， and clean or tighten them if necessary. Heat dissipation maintenance

Key points for maintenance and replacement of Atlas Copco (Atmospheric Copco) solenoid valves: During daily use, it is necessary to pay attention to cleaning to prevent the valve core from getting stuck or the seal from failing due to impurities in the compressed air. If the solenoid valve does not operate, leaks, or control fails, it is necessary to check if the power supply is normal and if the valve core is worn. It is recommended to replace the original factory parts to ensure compatibility and reliability.

Atlas Copco Ventilation Pipe Component Application and Maintenance Recommendations Application Scenario: Primarily used for the ventilation system setup in air compressor rooms, especially in enclosed or poorly ventilated environments, where the use of ventilation pipe components is necessary to optimize air circulation and maintain the room temperature within the equipment's allowable range (generally recommended not to exceed 40℃). Maintenance Points: Regularly inspect the ventilation pipes for any damage, deformation, or loose connections to ensure there is no air leakage; Clean the dust accumulation in the pipes to prevent blockages that affect air volume; For flexible connection pipes, check for aging, cracking, and replace them in a timely manner to ensure their elasticity and sealing performance.

Model and compatible models: The oil filter kit for Atlas Copco air compressors comes in various models. Some of them are suitable for oil filters of RXD series lubricants, such as 3001160212, which are applicable to air compressors of models like GA5, GA7, GA11, GA7VSD+, GA11VSD+, GA15VSD+, G7, etc.

As an original part, it has precise compatibility with the specific model of air compressor produced by Atlas Copco (the exact compatible model can be referred to in the equipment manual), ensuring filtration efficiency and sealing performance. Its parameters such as filtration accuracy and pressure resistance range all meet the strict standards of the manufacturer. It is generally recommended to replace it according to the equipment maintenance cycle (such as after a certain number of operating hours), to ensure the filtration effect and avoid equipment failure due to filter failure. In industrial production, these oil filters are important consumables for the maintenance and upkeep of air compressors, playing a significant role in ensuring the long-term stable operation of the equipment and reducing maintenance costs.