China Eccentric Ring Manufacturer, Supplier, Factory

1092110800 Maintenance and Replacement Instructions for the Transmission Shaft Seal Kit of the Haskomp Screw Air Compressor If oil stains are found near the transmission shaft or there is oil leakage, or if the consumption of the compressor lubricant increases abnormally, this may be due to the aging or damage of the seal kit. Therefore, it is necessary to conduct an inspection and replace it in a timely manner. When replacing, use the original seal kit and follow the equipment manual for operation to ensure that the installation direction of the sealing piece is correct and it is tightly attached. If necessary, special tools can be used for installation to avoid deformation or damage to the sealing piece.

The component design of Atlas Copco dryers emphasizes compatibility with air compressor systems. By optimizing heat exchange efficiency, adsorbent performance and automatic control logic, it achieves low energy consumption and high stability in the drying process of compressed air.

"D70" might refer to the diameter specification of the conveying disc (such as 70mm), which is used to accommodate materials of specific sizes (such as small fasteners, accessories, etc.); "10" might be related to the rated conveying capacity, the applicable pressure parameters (such as 10bar), or the installation interface specifications.

Atlas Copco 2901141200,By conducting regular maintenance and troubleshooting, we can prevent sudden failures and ensure the continuous and stable operation of the air compressor, avoiding production line disruptions due to equipment downtime. Timely addressing issues such as wear and aging can delay the decline in equipment performance, thereby extending the overall service life of the air compressor. Regular servicing can reduce the need for emergency repairs and lower long-term maintenance costs. At the same time, by detecting minor problems early and preventing them from escalating into major failures, we can further save costs. The air compressor after maintenance operates more efficiently, with improved energy utilization, which helps reduce production costs.

The V-shaped belt has the characteristics of simple structure, high transmission efficiency and convenient maintenance. It is suitable for equipment that requires stable power transmission, such as air compressors. In Atlas Copco air compressors, the specifications and models of the V-shaped belts vary according to the specific compressor model and power, in order to meet different transmission requirements.

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc. Preventing oil passage blockage: Prevent impurities from accumulating in the oil passage, ensure the smoothness of the oil passage, enable the lubricating oil to circulate normally, provide sufficient lubrication and cooling for each component, and prevent problems such as overheating shutdown caused by insufficient oil supply.