China compressor spare parts for atlas copco kit Manufacturer, Supplier, Factory

Maintenance and Replacement Suggestions for Atlas Copco Oil Coolers Regular Cleaning: For air-cooled coolers, clean the dust and oil stains on the fins regularly. For water-cooled ones, check if the water channels are blocked or clogged to ensure the cooling effect. Leak Check: During daily inspections, observe if there are oil stains on the surface and interface of the cooler. If leakage is detected, replace the sealing parts or the entire kit promptly. Replacement Timing: When the cooler shows severe corrosion, large-scale damage to the fins, or internal blockage causing abnormal oil temperature rise (above the specified upper limit of the unit), it is recommended to replace the entire kit. Preferentially use Atlas Copco original accessories to ensure compatibility with the unit and cooling performance. The reliable operation of this kit directly affects the energy consumption, stability, and service life of the oil-free air compressor, and is an important guarantee for maintaining the efficient operation of the unit.

If you're seeking a trusted supplier for the 1621600602 Genuine Cooler Core Atlas Copco in China, Taike China is the place to be. As a reliable and rapidly expanding distributor of genuine air compressors and spare parts, we strive to offer our customers the most competitive prices. Should you require further information or references, please feel free to get in touch with us.

1900520440 Maintenance and Fault Handling of the Oil Temperature Electronic Elektronikon Control Module of Atlas Copco Air Compressors If there are abnormal oil temperature readings, the heating/cooling system does not respond, or the oil temperature protection is triggered frequently, it may be related to this control module. Maintenance suggestions: First, check whether the oil temperature sensor and connection lines are normal. Eliminate front-end signal faults; If the module itself is faulty, it is recommended to replace the original factory parts to ensure control performance. After replacement, calibration of parameters through special tools is required to make it match the model; Regularly check the module status through the self-check function of the Elektronikon system to promptly detect potential problems.

The Atlas Copco 60HP Oil Injected Air Compressors from Taike supplier is one of the ideal choices for producing compressed air and reducing energy consumption.Atlas Copco's GA oil-injected screw compressors provide you with industry-leading performance and reliability, and allow you to benefit from low costs.

Atlas Copco Daily Maintenance: Manual Drain Valve: Drain at least 1-2 times per day. The drainage effect is better after the machine is shut down (at this time, the system pressure is low and water is easier to be discharged). Automatic Drain Valve: Check once a week. Clean the impurities (such as oil stains, rust) in the filter or float ball to prevent blockage. Electronic Drain Valve: Regularly check if the timer settings are reasonable, clean the electromagnetic valve valve core to ensure smooth operation. When the ambient temperature is below 0℃, take measures such as insulation or heating to prevent the drainage port from freezing and getting clogged.

Maintenance and precautions for the control unit of Atlas Copco air compressors Regularly check the display screen and buttons of the control unit to ensure they are functioning properly and that the heat dissipation and ventilation are adequate, to prevent the impact of high temperatures on performance. If a fault code appears, it is recommended to refer to the equipment manual for interpretation or contact the authorized service center of Atlas Copco for handling to avoid the expansion of problems due to self-operation. Some control units support firmware upgrades, and updates can be obtained through official channels to enhance functional stability.