China Atlas Copco Wear Kits Manufacturer, Supplier, Factory

The Atlas Copco air filter, with its multi-level filtration design and precise adaptability, provides reliable intake protection for the air compressor. It is a crucial maintenance component that ensures the long-term efficient operation of the unit and reduces the failure rate.

The Atlas Copco UD + series of filters come in multiple specific models (such as UD9+, UD15+, etc.), each corresponding to different processing flow rates and applicable equipment. If you need to know the parameters, compatible models or purchasing information for a specific model, it is recommended to obtain detailed information through the official channels of Atlas Copco or authorized dealers.

The oil filter models corresponding to different models of the XAS series air compressors vary. Common oil filter models include 1613610500, 97125402, 9709003400, 9710009801, 1613610500, etc. (The specific model needs to be determined according to the specific model of the air compressor.)

Note the installation requirements: When replacing the coupling components, follow the equipment specifications to ensure that the coaxiality and other installation parameters meet the standards, and avoid secondary damage.

Atlas Copco Air Compressors Oil Injected Screw Compressor Ball Valve 1/4 Selection Recommendation Applicable Models: The interface standards and working parameters need to be confirmed based on the specific model of the oil-injected screw compressor (such as Atlas Copco GA series small machines, Ingersoll Rand SSR series, etc.). Certification Requirements: Prioritize products that comply with industrial standards (such as ISO, DIN) to ensure compatibility with the system. Maintainability: Choose a disassemblable and repairable structure to facilitate the replacement of seals and extend the service life. If used to replace original factory parts, it is recommended to provide the compressor model and the original valve part number to ensure complete matching of size and pressure rating, avoiding any impact on system operation due to compatibility issues.

Replacement and Maintenance Recommendations: Replacement Cycle: Generally, replace the filter every 1,000 - 2,000 hours or 6 months (whichever comes first). In environments with high dust concentration (such as mines, cement plants), this period should be shortened to 500 - 800 hours. Replacement Indicators: If the intake resistance becomes excessively high (over 100 - 150 mbar, which can be observed through a pressure gauge), if the compressor's exhaust volume decreases, or if there is abnormal noise from the main unit, it is necessary to immediately check and replace it. Maintenance Tips: During daily maintenance, the filter element can be removed. Use compressed air to blow off the surface dust from the inside out (pressure ≤ 5 bar), but do not wash it with water; during replacement, clean the interior of the filter housing to ensure there are no residual impurities.