China ATLAS COPCO Original parts Manufacturer, Supplier, Factory

Atlas Copco confirms the type of lubricating grease Based on the type of air compressor components and operating conditions , select the matching special lubricating grease . It is strictly prohibited to mix different types or grades of lubricating grease . Check the parameters of the lubricating grease: such as applicable temperature range, pour point , and penetration . Atlas Copco cleans the components to be lubricated Stop the machine and ensure the components are completely cooled. Use oil-free cotton cloth or dedicated cleaning agents to wipe the old lubricating grease, oil stains, dust, and metal debris on the surface of the components, especially the key areas such as the bearing seat and the meshing surface of the gears, which need thorough cleaning .

Maintenance notice for the oil filter housing of Atlas Copco air compressor 1117021 A52D: When replacing the filter element of the oil filter, it is necessary to check whether the sealing parts (such as O-rings) of this housing are in good condition. If there is aging or damage, they should be replaced in time to avoid oil leakage. During installation, it is necessary to tighten according to the specified torque to ensure the sealing performance.

If you are looking for “Atlas Copco Genuine Original” Atlas Copco 1622319772-1622858772 Fan or any other related fan assemblies part numbers for any Atlas Copco compressors, Taike Trading Co., Ltd. can provide you the best prices. Based in China, growing to be one of the main online air compressors and spare parts suppliers, our prices are unbeatable, while the quality it 100% genuine original.

Buy Atlas Copco F285 Refrigerant Air Dryer 17.1 M3 per Min Genuine Industrial Compressed Air Dryer 16Bar from a reliable China supplier. Get factory price, OEM support and fast delivery for industrial compressed air systems.

Attention to the Atlas Copco Adsorption Dryer Silencer: During installation, ensure that the sealing gasket is intact to prevent air leakage, which could lead to increased noise and reduced regeneration efficiency; Do not replace it with an incompatible model at will (for example, if the diameter is too small, it will cause excessive exhaust resistance, affecting the regeneration effect of the adsorbent); The original factory silencer is usually designed with acoustic optimization, not only providing better noise reduction effects, but also ensuring the smoothness of the regeneration exhaust and maintaining the normal cycle of the dryer.

Atlas Copco Air Compressor Oil Check Valve Maintenance and Replacement Check Period: It is recommended to conduct checks every 1-2 years or in accordance with the equipment manual (for example, after 4000-8000 hours of operation), and perform the checks simultaneously when replacing the filter and oil. Maintenance Points: Clean the valve core and valve seat to remove impurities; Check the wear of the seals and replace them promptly if they are aged; Test the elasticity of the springs. If the elasticity is insufficient, replace the entire valve. Replacement Precautions: Select original factory parts that match the model (such as Atlas Copco, Ingersoll Rand, etc. have dedicated oil check valves). Ensure that the size and pressure parameters are consistent; Pay attention to the direction during installation, and avoid installing it in the wrong direction; After replacement, start the equipment and check if the oil circuit pressure is normal and if there is any leakage.