China Atlas Copco 2906081200 Manufacturer, Supplier, Factory

The original Atlas Copco air filter maintenance kit has been rigorously tested in terms of filtration efficiency, dust holding capacity, and structural strength, and is perfectly matched with the equipment design. It can maximize the filtration effect. Non-original filter elements may have issues such as insufficient filtration accuracy, excessive intake resistance, or poor sealing. Long-term use may lead to accelerated wear of the main unit, increased energy consumption, and ultimately increase the maintenance cost of the equipment.

The GVs R series is a robust and highly regarded range of vacuum pumps with a technologicallyadvanced design that is 'Made in India, The GVs R series are single stage, oil-sealed vacuumpumps that operate according to the proven oil-sealed rotary vane principle that has beensuccessfully used for many years in all general vacuum applications of the industry.

Gear transmission of the air compressor body: For Atlas Copco G/GA and other oil-injected screw compressors, "high-performance gear drive" is commonly used. The motor drives the main unit through a gearbox for speed increase, which is a transmission structure rather than a "gear motor".

Attention points for pressure reducers in Atlas Copco air compressor systems: Matching system pressure: The rated input pressure of the pressure reducer must match the exhaust pressure of the air compressor (for example, if the rated pressure of the air compressor is 10 bar, a pressure reducer with a rated input of ≥ 10 bar should be selected). Downstream load limit: The output pressure should be set according to the rated working pressure of the downstream equipment to avoid overpressure damage to the equipment. Regular calibration: After long-term use, pressure drift may occur, so it is necessary to regularly check and calibrate to ensure stable pressure.

Key Points for Bolt Installation and Maintenance of Atlas Copco Pre-tightening Torque: Appropriate torque should be applied according to the bolt's strength grade and connection requirements . Excessive torque can cause the bolt to break, while insufficient torque may result in poor sealing or loosening. Surface Treatment: The bolt surface is usually galvanized, phosphated , or oxidized . Before installation, check the surface for rust or damage. Cooperation Precision: The cooperation between the bolt and the nut or the bolt hole must comply with standards . Avoid overly loose or overly tight threads. Regular Inspection: After the air compressor has been running for a period of time, check if the bolts are loose. If rust, deformation, or fracture is found, replace the bolts of the same specification and strength in a timely manner.

1613610591 Atlas Copco uses high-quality filter materials, with a filtration accuracy reaching the micron level. It can effectively retain tiny impurities. 1613610591 Atlas Copco is equipped with a bypass valve. When the filter element gets clogged and the pressure difference exceeds the set value, the bypass valve will automatically open to ensure the continuous circulation of lubricating oil and prevent the equipment from suddenly breaking down due to lack of oil.