China Atlas Copco 2906065800 Manufacturer, Supplier, Factory

ATLAS COPCO's FILTER KIT DD/DDP 130 + Usage and Maintenance Tips: The filter element should be replaced regularly based on the operating time of the equipment or the monitoring results of the compressed air quality. It is generally recommended to follow the maintenance cycle recommended by ATLAS COPCO to avoid affecting the efficiency of the dryer or causing excessive pressure drop due to clogged filter elements. The replacement process requires closing the relevant air path and releasing the pressure. The operation should comply with safety regulations. It is recommended to be carried out by professionals in accordance with the equipment manual to ensure correct installation.

The GA series compressors offer an ideal solution for modern industrial applications. These compressors, equipped with advanced technology, can optimize the air compression process and reduce energy consumption. This not only helps to lower the operational costs of enterprises but is also an environmentally friendly approach. The GA series compressors have the ability to adapt to different air demands, which is highly regarded. These compressors adopt a modular design and can easily meet the expansion needs of factories. In addition, their design aims to minimize the maintenance requirements of users. With the aid of automatic control systems and remote monitoring options, maintenance work is simplified, ensuring that operations can proceed smoothly without interruption.

When choosing Atlas Copco air compressor mufflers, it is necessary to make a comprehensive match based on the signals of the air compressor, power, exhaust pressure, noise frequency characteristics, and the usage environment (such as whether there is oil contamination, high temperature, etc.), in order to achieve the desired noise reduction effect and ensure the normal operation of the compressed air system.

Replacement and Maintenance Precautions If the components show signs of aging and cracking of the hose, leakage at the joints, damage to the reinforcement layer, or bulging, they must be replaced immediately to prevent leakage of high-pressure media, which could cause safety hazards or affect system operation; When replacing, it is essential to use the original Fx1050Xf type components to ensure that their dimensions, pressure resistance level, and joint sealing are consistent with the original components. Non-original components may cause installation difficulties or premature damage due to poor compatibility; During installation, pay attention to the bending radius of the hose (it must not be less than the specified value, usually 6-8 times the diameter of the hose), avoid excessive twisting or stretching, and keep away from high-temperature components and rotating parts. If necessary, use pipe clamps for fixation to reduce vibration and wear.

The 4000-hour oil filter usage recommendation for Atlas Copco: It is necessary to replace the filter according to the equipment manual, taking into account the operating time and actual oil condition. Even if it has not reached 4000 hours, if you find that the filter is clogged or the pressure difference is too high, you should replace it promptly. When replacing, it is necessary to use original factory parts to ensure the filtering performance and equipment safety. Avoiding failures such as main unit wear caused by inferior filters.

"D70" might refer to the diameter specification of the conveying disc (such as 70mm), which is used to accommodate materials of specific sizes (such as small fasteners, accessories, etc.); "10" might be related to the rated conveying capacity, the applicable pressure parameters (such as 10bar), or the installation interface specifications.