China Atlas Copco 2901063520 Manufacturer, Supplier, Factory

I.Main Components Included in the Set。 Air filter Filters out dust and impurities in the air to prevent them from entering the compressor. It is recommended to replace every 4000 hours to avoid blockage that leads to a decrease in air volume and increased energy consumption. Oil filter Filters impurities in the lubricating oil to protect key components such as bearings and gears. Blockage will cause an increase in oil pressure, triggering a protective shutdown. Oil-gas separator Separates the lubricating oil from the compressed air to ensure that the exhaust contains an acceptable amount of oil (typically ≤ 3ppm). Failure will result in increased fuel consumption, oil in the exhaust, and contamination of the after-treatment equipment. Lubricating oil Synthetic lubricants (such as the SynthOil series from Atlas Copco) provide lubrication, cooling and sealing functions. They need to be replaced every 4,000 hours. Old lubricants will reduce cooling efficiency and increase the risk of carbon deposits. Sealing kit Includes O-rings, gaskets, etc., to prevent leakage of lubricating oil and compressed air. Old sealing parts may cause a decrease in pressure or oil leakage. Other accessories Some packages may include belts (belt drive type), sensors, hoses, etc. II. Advantages of the Maintenance Package One-stop purchase: A single package covers all the replacement needs of key components, avoiding the omission of accessories. Original factory matching: Atlas Copco original accessories ensure perfect compatibility with the equipment, extending the service life. Cost-effectiveness: The package price is usually more favorable than purchasing accessories separately. Professional guidance: A detailed maintenance manual is included, guiding users on how to replace the accessories correctly.

Atlas Copco 2902022207,The functions of the Atlas Copco air compressor exchange unit: The core function is heat recovery and system optimization. The main role of the air compressor exchange unit is to recover the waste heat generated during the operation of the air compressors and transfer this heat to the cold water through heat exchange, heating it to 50-80℃, which is then used for domestic hot water, process hot water or residual heat cooling in enterprises, achieving "zero-cost" hot water supply and reducing the enterprise's reliance on mineral energy. The auxiliary function is to ensure the stable operation of the air compressor. By recovering the waste heat, it can effectively lower the internal temperature of the air compressor, reduce the impact of high temperatures on the equipment, and extend the service life of the air compressor; at the same time, it reduces the frequency of high-temperature alarms of the air compressor, reduces the operating time of fans and other cooling systems, and saves energy loss.

Atlas Copco 1604530702,The main functions of lubricating oil are lubrication and reduction of friction. It forms a protective film between moving parts, reduces the friction coefficient, minimizes wear, and extends the lifespan of equipment. It also cools and dissipates heat, absorbs and removes the heat generated by friction, prevents the equipment from overheating, and ensures stable operation. It seals and prevents leakage, fills the gaps between components to prevent gas leakage and impurities from entering, and improves the sealing performance. It prevents rust and corrosion, forms a protective film on the metal surface to resist oxidation and water erosion, and avoids rusting. It cleans and buffers, removes impurities and deposits them at the bottom of the oil tank, and absorbs impact loads to reduce vibration.

The air compressor regular maintenance kit is designed to ensure the normal operation of the air compressor and extend its service life.

Atlas Copco 0663211199,The O-ring is a seemingly insignificant yet crucial sealing component. It fills the gaps between components through elastic deformation and is responsible for ensuring the efficient sealing of liquid and gas media by the air compressor. They are suitable for secondary static and dynamic uses. The O-ring can be sealed radially or axially as a whole. The sealing is achieved during assembly through axial or radial movement within the air compressor. Although the O-ring is small, it is the key to ensuring the sealing performance, efficiency, and lifespan of the equipment. Correct selection, proper installation, and meticulous maintenance are crucial.

Atlas Copco confirms the type of lubricating grease Based on the type of air compressor components and operating conditions , select the matching special lubricating grease . It is strictly prohibited to mix different types or grades of lubricating grease . Check the parameters of the lubricating grease: such as applicable temperature range, pour point , and penetration . Atlas Copco cleans the components to be lubricated Stop the machine and ensure the components are completely cooled. Use oil-free cotton cloth or dedicated cleaning agents to wipe the old lubricating grease, oil stains, dust, and metal debris on the surface of the components, especially the key areas such as the bearing seat and the meshing surface of the gears, which need thorough cleaning .