China Atlas Copco 1320404730 Manufacturer, Supplier, Factory

Atlas Copco Maintenance and Replacement Recommendations Replacement Cycle: it is recommended to replace the filter according to the specified cycle in the unit maintenance manual . If the dust concentration in the usage environment is high, the replacement cycle should be shortened . Condition Judgment: Some models are equipped with an air filter pressure differential indicator. When the indicator value exceeds the set threshold, it indicates that the filter is clogged and needs to be replaced immediately; without an indicator, regularly disassemble and inspect the accumulated dust on the filter material surface. If it is obviously clogged or damaged, replace it immediately. Replacement Precautions: Before replacement, the unit must be shut down and the power disconnected to ensure safety. During installation, clean the impurities around the air inlet to avoid contaminants from falling into the air intake pipe during disassembly and assembly.

The working principle of the constant temperature valve for Atlas Copco air compressors: When the air compressor starts, the oil temperature is low. The constant temperature valve will close the oil circuit of the cooler, allowing the lubricating fluid to directly enter the main unit, rapidly increasing the temperature and reducing wear. When the temperature rises to 70-80 degrees Celsius, the constant temperature valve will slowly open the cooling channel of the cooler, allowing the lubricating oil to cool down before entering the circulation. This can prevent the oil temperature from being too high, which would lead to a decrease in lubrication effect and overheating problems of the equipment.

The Atlas Copco WUX series air compressor regulating valves are crucial components used to control the pressure, flow rate or load of the compressed air system. Their main function is to automatically adjust the intake volume or operating status of the compressor based on the demand for gas or changes in system pressure, in order to achieve energy-saving operation and stable gas supply.

Notes for Attention Regular inspection: The pressure relief valve should be subject to regular functional checks and calibrations to ensure it operates properly in case of abnormal pressure, preventing failure due to issues such as valve core jamming. Replacement of genuine products: When replacing the pressure relief valve, it is recommended to choose original Atlas Copco spare parts or products from authorized official channels to ensure compatibility with the equipment and safety. Professional installation: The installation process should be carried out by professional technicians to ensure reliable valve connection and sealing, and to meet the pressure specification requirements of the equipment.

Installation and Maintenance Instructions Oil pipes inside the unit: Replace after shutdown, depressurization and cooling; Record the direction and connection sequence, clean the interfaces, assemble according to the specified torque; Recheck the pressure drop and leakage after operation. Gas pipelines: Avoid excessive bending / stretching and dragging on the ground; Regularly inspect the joints and wear; Perform a gas tightness test when necessary.

2901300009 The filter is used to separate oil from the compressed air, ensuring the purity of the output compressed air. Its filter material is usually made of ultra-fine glass fibers from companies such as HV in the US, Lydall, and Johns Manville. The filtration accuracy can reach 0.1μm, and the oil content in the compressed air can be below 3ppm, with a filtration efficiency of 99.99%.