China air compressor THERMOSTAT KIT 60 DEGREE C Manufacturer, Supplier, Factory

BY REPLACING THE OIL FILTER ON YOUR COMPRESSOR, YOU PREVENT AN ARRAY OF SHORT AND LONG TERM PROBLEMS, AS WELL AS SAVES YOU DOWN-TIME AND REPAIR COSTS LATER ON.THIS OIL FILTER MEETS OR EXCEEDS OEM SPECIFICATIONS.

2906049700 Atlas Copco Air Intake Valve Components and Adjustment Modules are the "breathing control center" of the air compressor. Their performance directly affects the energy consumption and stability of the equipment. It is recommended to purchase original factory parts through our authorized dealers of Atlas Copco. Original factory parts have undergone strict compatibility tests and can ensure compatibility and long-term reliability with the Z110-145 series models. Non-original factory parts may result in insufficient control accuracy due to size deviations or material issues, and even shorten the service life of the equipment.

The non-driven side motor assembly of the Atlas Copco oil-injected screw compressor is the part of the motor that is separated from the connection end of the compressor main body. Although it does not directly participate in power transmission, its structure and performance are of vital importance to the overall operational stability, heat dissipation effect, and safety of the equipment of the motor.

Atlas Copco 2204155654，The motor power is transmitted to the compressor rotor through friction, achieving air compression. At the same time, by coordinating with different diameter pulleys, the rotational speed of the compressor can be adjusted to meet the process requirements. It has good elasticity, which can effectively buffer the impact and vibration during operation, reduce noise, and prevent damage to parts due to excessive load, providing safety protection. It ensures the stable rotational speed of the compressor rotor, maintaining the continuity and efficiency of air compression. Its wear-resistant and anti-aging properties can extend the service life and reduce maintenance costs. As an expendable item, it is prone to wear, slackening or decreased elasticity. Regular checks on tension are necessary, and damaged parts should be replaced in time to avoid damage to the new belt due to unilateral wear.

Atlas Copco 2906000600,Reducing gas temperature in multi-stage compression process, after the gas passes through the previous stage of compression, its temperature will rise sharply. The intercooler is located between the compression stages and can cool the high-temperature gas, providing lower-temperature and denser gas for the next stage of compression. Enhancing system efficiency The cooling process makes the compression process closer to isothermal compression, thereby reducing power consumption and improving the operational efficiency and economy of the entire compressor system. Separating condensate When the gas temperature drops, the water vapor and oil-gas mixture contained therein will condense. Some lubricating oil and water will condense into droplets, which can then be separated out, making the output compressed air cleaner. By effectively controlling the gas temperature, risks such as lubricant failure, equipment component damage, and even explosion caused by excessively high temperatures can be prevented. At the same time, the pollution risks to downstream equipment and pipelines can also be reduced.

Atlas Copco 2906049900,The principle of the air compressor maintenance kit: Replace worn parts, perform maintenance and troubleshooting, ensure safety,Air filter element Remove garbage from the bottom. The filter with grease needs to be soaked in foam-free detergent. Damaged filters need to be replaced. Oil separator To ensure high efficiency of oil-gas separation, it is necessary to pass the compressed gas from the collision and gravity separation compressor through the oil separation process. Safety valve It is necessary to ensure the quality and safety of pressure vessels. Professional adjustments are required. Lubrication system Test the oil quality with screw oil and maintain the lubrication of bearings and the lifespan of the compressor Maintenance process standardization 1. Shut down and power off: Turn off the power and hang warning signs 2. System depressurization: Close the water supply and gas supply valves 3. Disassembly and inspection: Use tools to disassemble the components. It is necessary to check the rotor alignment status and bearing damage 4. Component maintenance: Replace the filter and lubricate, etc.