China Air Compressor FILTER OIL AC 8000H Manufacturer, Supplier, Factory

Atlas Copco 2901188900，,The principle of the air compressor maintenance kit: Replace worn parts, perform maintenance and troubleshooting, ensure safety,Air filter element Remove garbage from the bottom. The filter with grease needs to be soaked in foam-free detergent. Damaged filters need to be replaced. Oil separator To ensure high efficiency of oil-gas separation, it is necessary to pass the compressed gas from the collision and gravity separation compressor through the oil separation process. Safety valve It is necessary to ensure the quality and safety of pressure vessels. Professional adjustments are required. Lubrication system Test the oil quality with screw oil and maintain the lubrication of bearings and the lifespan of the compressor Maintenance process standardization 1. Shut down and power off: Turn off the power and hang warning signs 2. System depressurization: Close the water supply and gas supply valves 3. Disassembly and inspection: Use tools to disassemble the components. It is necessary to check the rotor alignment status and bearing damage 4. Component maintenance: Replace the filter and lubricate, etc

3002619010 Atlas Copco Maintenance and Replacement Guidelines Synchronous Replacement: It is recommended to replace the air filter, oil filter, and lubricating oil at the same time to reduce the oil pressure difference and energy consumption. Installation and Sealing: Install according to the manual torque. Replace all O-rings to avoid bypass of unfiltered air or oil. Pressure Difference Monitoring: Pay attention to the oil pressure difference and fuel consumption. If it abnormally increases, stop the machine for inspection and replacement. Environment and Load: In high dust / high humidity or heavy load conditions, the replacement cycle can be shortened to 3500 - 4000 hours or less.

Atlas Copco 2013400282，Effectively intercept metal shavings, fibers, gums, moisture and external dust in the lubricating oil, preventing them from entering the main unit and the oil circuit system, and avoiding mechanical wear and contamination. Maintain the cleanliness of the oil, reduce the wear of precision parts such as bearings and gears, lower the failure rate, and thereby extend the overall service life of the air compressor. Clean lubricating oil can reduce friction resistance, improve compression efficiency, reduce unplanned downtime, and ensure the normal operation of the oil separator, reducing the oil content in the compressed air. Filter out aged substances and carbon deposits to prevent them from forming carbon deposits under high temperatures, which would affect the cooling effect and lubrication performance, and ensure that the lubricating oil continues to function effectively.

Maintenance suggestions for the sliding sealing components of Atlas Copco air compressors: Regularly inspect the wear condition of the sealing parts (such as the opening gap of the piston ring, the leakage volume of the piston rod seal); Atlas Copco Ensure the normal operation of the lubrication system (oil mist lubrication or solid lubricant in no-oil conditions); Atlas Copco Filter the intake air (reduce dust and other impurities); When replacing the sealing parts, select the model and material that match the working conditions and ensure the installation accuracy.

Atlas Copco 1630390495,The core functions of Atlas Copco air compressors are as follows: They separate oil, water and impurities, using physical filtration and centrifugal separation technologies to effectively remove oil droplets and water vapor from the compressed air, ensuring the cleanliness of the output air. They protect pneumatic equipment, preventing oil and water vapor from corroding and wearing down the internal components of the compressor and the end pneumatic tools, thereby extending the equipment's service life. They are energy-efficient and environmentally friendly, reducing oil and water emissions, lowering energy consumption, and avoiding environmental pollution.

Atlas Copco 2901144800,The principle of the air compressor maintenance kit: Replace worn parts, perform maintenance and troubleshooting, ensure safety,Air filter element Remove garbage from the bottom. The filter with grease needs to be soaked in foam-free detergent. Damaged filters need to be replaced.Atlas Copco 2901144800,Material and Parameters The maintenance package uses a screw-type compressor and has dimensions in stainless steel. It supports filtration. Atlas Maintenance Package: Some models use stainless steel filters. The Disposal Maintenance Package is for screw air compressors. Application Scope: General: Most maintenance packages are applicable to screw air compressors and cover protection of components such as intake valves and pressure valves. Brand Compatibility: Different models correspond to different brands. Delivery Schedule: Maintenance package parts can be shipped quickly. Other parts need to be adjusted based on order quantity and inventory. Custom Service: It is consumable materials with a large inventory.