China Air compressor drain valve Manufacturer, Supplier, Factory

2901990772 COOLER KIT ZH 355-1600 Working Principle: Taking the oil cooler as an example, its working principle is that water flows through the tube side, and the oil flows between the tubes. The intermediate baffle plate causes the oil to redirect, and a two-pass or four-pass flow mode is adopted to enhance the cooling effect, thereby transferring the heat of the lubricating oil to the cooling water to achieve the cooling of the lubricating oil.

Key points for replacement and maintenance: When replacing, the oil separator filter element should be replaced simultaneously. Also, check if the sealing gasket is aged. If necessary, replace it together to ensure a proper seal. Before installation, clean the oil stains and impurities on the interface surface. Tighten according to the specified torque to avoid over-tightening which may cause the shell to deform or under-tightening which may lead to leakage. Regularly (usually in accordance with the filter element replacement cycle, approximately 2000-4000 hours) check if there are any cracks, corrosion or deformation in the shell. Replace it promptly if any abnormalities are found.

Maintenance and replacement precautions for the pressure valves of Atlas Copco industrial air compressors: Regularly check the sealing performance and adjustment accuracy of the pressure valves. If there are problems such as excessive pressure fluctuations, leakage, or inability to relieve pressure, timely maintenance is required. When replacing, use original Atlas Copco parts to ensure compatibility with the compressor model and avoid system failures due to parameter mismatch. Maintenance or adjustment should be carried out by professional technicians. Follow the equipment manual specifications strictly to prevent safety risks caused by incorrect pressure settings.

Using the original Atlas Copco kit for maintenance can ensure that the compressor maintains the same performance and reliability as a new unit, as these original parts are specifically designed for air compressors and can guarantee that the equipment reaches the desired performance level, improving the machine's availability and service life. If you need more accurate kit contents and detailed information, it is recommended to provide the specific model and serial number of the air compressor so that the precise kit configuration can be queried through the official Atlas Copco channels.

Attention Points for Lubricant Selection of Atlas Copco's GA and GX Series Air Compressors Compatibility: Non-original lubricants may not be compatible with the equipment material or the original residual lubricants, leading to problems such as sludge formation and seal aging. It is recommended to avoid mixing them. Work Condition Adaptation: Select the appropriate type of lubricant based on the working pressure, temperature, running time, and environmental conditions of the air compressor. Regular Replacement: Even for long-lasting lubricants, it is necessary to regularly check the oil level and quality as per the manual, and replace them on time. At the same time, replace the oil filter to avoid affecting the equipment performance due to deteriorated oil quality. Model Matching: The GA series are mostly large industrial-grade air compressors, while the GX series are more inclined towards small-sized or portable ones.

Oil Filter Filtering Precision: Usually, it adopts ultra-fine glass fiber composite filter material from the US HV Company or pure imported wood pulp filter material from the Korean Ahlstrom Company. The filtering precision is 10μm - 15μm, which can filter out solid particles, impurities, carbon deposits and metal shavings in the lubricating oil. Performance Features: It has the characteristics of withstanding high and low temperatures, and being resistant to synthetic oil. It can withstand high operating pressure, has strong pollutant absorption capacity, and a long service life. The filter paper has uniform pleat intervals, providing a large filtration area. It has strong mechanical resistance to pressure fluctuations and can ensure that the oil continuously flows to the compressor main unit under cold starting conditions or when the filter is clogged, protecting the equipment from malfunction.