China 3001531117 Manufacturer, Supplier, Factory

1900520013 This controller is equipped with 3G connection functionality. It enables the machine to be connected to the cloud without any additional cost, facilitating users to conduct remote monitoring and management through Atlas Copco's Smartlink 2.0 monitoring system, thereby helping factories advance towards Industry 4.0.

The working principle of the constant temperature valve for Atlas Copco air compressors: When the air compressor starts, the oil temperature is low. The constant temperature valve will close the oil circuit of the cooler, allowing the lubricating fluid to directly enter the main unit, rapidly increasing the temperature and reducing wear. When the temperature rises to 70-80 degrees Celsius, the constant temperature valve will slowly open the cooling channel of the cooler, allowing the lubricating oil to cool down before entering the circulation. This can prevent the oil temperature from being too high, which would lead to a decrease in lubrication effect and overheating problems of the equipment.

The oil filter assembly of the air compressor is one of the key components that ensure the normal operation of the compressor. Its main function is to filter out impurities, metal particles, and sludge in the oil, preventing them from entering the critical friction components of the engine or the compressor (such as bearings, pistons, cylinders, etc.), thereby reducing wear, extending the equipment's lifespan, and ensuring the efficient operation of the lubrication system.

1630040899 Atlas Copco operates every 1000-2000 hours or every 6 months. In harsh environments with a lot of dust, the replacement cycle should be shortened. The model is equipped with an air filter clogging indicator. When the indicator alarms, the filter element must be replaced immediately. 1630040899 Atlas Copco. Before installing 1630040899 Atlas Copco, clean the filter housing to ensure a seal and prevent impurities from entering.

Maintenance Points Regularly replace the filter element: Based on the usage environment and operating time (generally recommended every 2,000-4,000 hours) , replace the filter element to avoid increased pressure loss and reduced filtering effect due to blockage. Pressure difference monitoring: Some models are equipped with a pressure difference indicator. When the filter element becomes clogged to a certain extent, it will give a prompt, and it is necessary to replace it in time to ensure the normal operation of the system. Sealing check: Regularly check the interface sealing condition of the filtering component to prevent unfiltered compressed air from leaking into the downstream system. If you need to purchase filter elements or want to know about specific compatible models, it is recommended to refer to the PD295 filtering component technical document provided by Atlas Copco officially, or provide the detailed model of the air compressor (such as GA37, GA55)

Installation Specifications: When replacing the cooler kit, strictly follow the steps in the equipment manual to ensure that the sealing components are installed properly, and avoid leakage or insufficient heat dissipation due to improper assembly. Cleaning Preparations: Before installing the new cooler, it is recommended to clean the pipes and interfaces of the cooling system to remove internal residues such as impurities, scale, or oil sludge. Performance Testing: After replacement, start the compressor and monitor parameters such as operating temperature and pressure to confirm that the cooling system is working properly . Source of Spare Parts: It is recommended to purchase this service kit from Atlas Copco's official after-sales service or authorized dealers to ensure the original factory quality and compatibility of the spare parts. Non-original factory spare parts may have size deviations or material non-compliance issues, affecting cooling efficiency and equipment lifespan.