China 2910501800 SERVICE KIT Manufacturer, Supplier, Factory

First separation: The oil-gas mixture containing various-sized oil droplets, which comes out from the exhaust port of the air compressor main unit, enters the oil-gas tank. Most of the oil in the oil-gas mixture falls to the bottom of the tank under the action of centrifugal force and gravity. Second separation: The compressed air containing oil mist (particles with a diameter of 1 micron or less) passes through the micrometer and fiberglass filter material layers of the oil-gas separation filter element for secondary separation. The oil particles undergo mechanisms such as diffusion, direct interception, and inertial collision aggregation, causing the suspended oil particles in the compressed air to quickly coalesce into large oil droplets. Under the action of gravity, the oil gathers at the bottom of the oil separation element and returns to the main lubricating oil system through the bottom concave area of the secondary return oil pipe inlet, thereby enabling the air compressor to discharge more pure and oil-free compressed air.

2906065600 Maintenance and Replacement Instructions for the Transmission Shaft Seal Kit of Atlas Copco Screw-Type Air Compressor If oil stains are found near the transmission shaft or there is oil leakage, or if the consumption of compressor lubricating oil increases abnormally, this may be due to the aging or damage of the seal kit. Therefore, it is necessary to check and replace it in time. When replacing, it is recommended to use the original seal kit and follow the equipment manual for operation to ensure that the installation direction of the sealing piece is correct and it is tightly attached. If necessary, special tools can be used for installation to avoid deformation or damage to the sealing piece.

Atlas Copco 0634100078,The functions of Atlas Copco seals: To prevent leakage. The seals fill the gaps between mechanical components through elastic deformation, blocking the leakage of compressed air or lubricating oil, ensuring stable system pressure. Isolate the medium, prevent the mixture of lubricating oil and compressed air, and ensure the purity of the gas. Reduce friction and wear. The seals with low friction coefficients can reduce the friction between the shaft seal and the rotating components, extending the equipment lifespan. Resist contamination, prevent external dust, moisture, and other impurities from entering the compressor interior, and protect the core components.

Atlas Copco 2908850000,The functions of Atlas Copco lubricating oil include: lubrication and friction reduction, which form a protective film between moving parts, reducing direct metal contact, lowering friction resistance, and extending equipment lifespan. Cooling and heat dissipation absorb and remove the heat generated during compression, preventing equipment from overheating and ensuring efficient operation. Sealing and protection prevent gas leakage, dust intrusion, and cross-contamination, while protecting the metal surface from oil deterioration or external erosion. Cleaning and rust prevention carry and deposit impurities, maintaining internal cleanliness; the rust inhibitor components can protect metals from oxidation. Buffering and stress dispersion mitigate shock and vibration, distribute load, and enhance system stability.

The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

Atlas Copco 2906037700,Ensure stable operation of equipment Through regular inspections, maintenance and servicing, potential faults can be promptly detected and addressed, preventing production or project delays caused by equipment downtime, especially in critical scenarios to ensure the continuity of compressed air supply. Optimize operational efficiency and costs The professional service team adjusts the parameters of the air compressor according to actual needs to achieve energy consumption optimization, reduce the usage cost for the lessee, and comply with energy conservation and environmental protection requirements. Enhance operational safety and reliability Provide operation training to ensure that personnel use the equipment correctly, reduce the risk of misoperation, and improve the overall reliability of the equipment through technical support. Strengthen cooperation trust and market competitiveness Timely and efficient services can enhance the trust between the lessee and the lessor, enhance the market competitiveness of the lessor, and promote the establishment of long-term cooperative relationships. Prevent faults and reduce downtime Through preventive maintenance, the failure rate can be reduced, the impact of sudden downtime on production can be minimized, and the project progress and economic benefits can be guaranteed.