China 2906049700 Z 110-145 INLET VLV BRG BLOCK Manufacturer, Supplier, Factory

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

Atlas Copco Purchase and Usage Recommendations Atlas Copco Model Matching: Select the corresponding kit based on the brand of the oil-free air compressor and the gearbox model (such as transmission power, reduction ratio). Avoid mismatched tool sizes or spare parts specifications. Atlas Copco Original Equipment Manufacturer Priority: It is recommended to choose the maintenance kit certified by the air compressor manufacturer to ensure that the material of spare parts (such as bearing accuracy grade, sealing performance resistance to aging) is consistent with the design standards of the gearbox. Atlas Copco Usage Specifications: Follow the maintenance manual provided with the kit, especially the torque parameters (such as the bolts of the gearbox cover usually require 25-35N·m) and the amount of lubricating grease (excessive may cause temperature rise).

Atlas Copco The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

Atlas Copco Common Problems and Risks Oil emulsification: This often occurs due to the failure to promptly drain condensate (such as when the drain valve of the oil separator is blocked). Regular drainage is necessary. After emulsification, the oil must be replaced immediately and the drainage system checked. Oil carbonization: Due to poor oxidation stability of the oil or excessive exhaust temperature (failure of the cooling system), carbon deposits will clog the core of the oil separator and the oil filter, resulting in increased pressure loss and increased energy consumption. In severe cases, it can cause the main unit to freeze. Abnormal oil level: Low oil level will lead to insufficient lubrication and cooling; high oil level will cause excessive oil content in the exhaust (the oil separator does not separate thoroughly), and oil needs to be added or drained according to the scale on the oil level gauge.

Using the original Atlas Copco kit for maintenance can ensure that the compressor maintains the same performance and reliability as a new unit, as these original parts are specifically designed for air compressors and can guarantee that the equipment reaches the desired performance level, improving the machine's availability and service life. If you need more accurate kit contents and detailed information, it is recommended to provide the specific model and serial number of the air compressor so that the precise kit configuration can be queried through the official Atlas Copco channels.

ATLAS COPCO GA160 Operating Instructions Before operation, please read the equipment manual to avoid mistakenly modifying critical parameters (such as excessive pressure limit). When a red fault alarm occurs, stop the machine for inspection first, eliminate the fault, and then restart it. Regularly clean the control panel to prevent dust or oil stains from affecting the sensitivity of the buttons.