China 2906044800 Manufacturer, Supplier, Factory

Replacement Precautions Before installation, clean the oil stains and impurities on the interface surface to avoid scratching the sealing ring. Ensure a proper installation to avoid distortion or excessive stretching, which may affect the sealing effect. It is recommended to conduct regular checks and replace it in a timely manner according to the usage environment (such as humidity, temperature, and medium). Generally, it is advisable to replace it synchronously with the equipment maintenance cycle.

Daily Maintenance of Air Compressor Intake Valve by Atlas Copco Regular Cleaning: The intake valve is prone to contamination from dust and impurities in the air. It should be disassembled and cleaned regularly to prevent the valve core from getting stuck and affecting normal operation. Check Seals: Aging or damaged sealing components such can lead to air leakage. Regular inspections and timely replacements are necessary. Lubrication Maintenance: For intake valves with moving parts, lubricants should be added according to the instructions to ensure smooth operation. Function Testing: Regularly test the smoothness of the valve's opening and closing and its response time to ensure it can accurately act according to pressure changes. If the intake valve malfunctions, it may cause problems such as insufficient air output, unstable pressure, increased energy consumption, and even affect the lifespan of the entire machine. Therefore, daily maintenance and upkeep are particularly important.

Replacement and Maintenance Suggestions: When the bushing shows excessive wear, scratches, cracks, or if the clearance between the bushing and the shaft exceeds the limit, it should be replaced immediately. Otherwise, it may cause wear on the shaft neck, increased vibration, or abnormal noise from the equipment. When replacing, use original factory parts and ensure that the surface of the shaft and the bearing housing are cleaned before installation. If necessary, perform size checks according to the manual requirements. During installation, avoid knocking the bushing to cause deformation. If necessary, use professional techniques such as hot assembly to ensure the mating accuracy.

Attention for the temperature control valve of Atlas Copco air compressors: The set value of the temperature control valve is preset at the factory and should not be adjusted by non-professionals without permission, as it may affect the safety of the equipment. When replacing, the specific model of the air compressor (such as GA37, G75, etc.) needs to be provided to ensure the compatibility of the accessories. It is recommended to purchase through official after-sales or authorized channels to avoid secondary faults caused by inferior accessories. Reasonable maintenance of the temperature control valve can effectively extend the service life of the air compressor, reduce energy consumption, and is an indispensable part of the daily maintenance of the equipment.

Atlas Copco Gear Trial Run and Inspection Preliminary Inspection Manually rotate the gear shaft to feel if the rotation is smooth, and check for any sticking, abnormal noise or eccentric vibration. Check if the lubrication path in the gearbox is unobstructed, and add gear oil to the standard level as per the regulations. No-load Trial Run Connect the power supply and conduct a short-term (5-10 minutes) no-load operation. Listen for any abnormal noises (such as metal friction sounds, high-frequency squeals) from the gearbox. After stopping the machine, check the temperatures of the bearings and gears (should not exceed the ambient temperature by 40°C), and observe for any oil leakage. Load Test Gradually load to the rated pressure and run for more than 30 minutes. Recheck the noise, temperature and sealing conditions, and confirm there are no abnormalities.

The electromagnetic valve maintenance kit for Atlas Copco EWD330 electronic drainage valve is applicable for maintenance suggestions. Applicable models: Only applicable to Atlas Copco EWD330 type electronic drainage valve. Before purchase, it is necessary to confirm the production batch and electromagnetic valve specification of the drainage valve to avoid model mismatch. Maintenance timing: When the drainage valve shows slow operation, abnormal drainage , abnormal noise from the electromagnetic valve, or air leakage, it may be necessary to repair the electromagnetic valve. At this time, this kit can be used to replace the worn parts. Installation note: It is recommended to operate by professionals. Before maintenance, cut off the power and air source, assemble in accordance with the original factory manual specifications, ensure that the components are installed properly, and avoid functional failure or safety hazards due to improper assembly.