China 2901141200 Atlas Copco Manufacturer, Supplier, Factory

The Atlas Copco adsorption air dryer uses two towers to alternate between adsorption and regeneration, enabling continuous supply of dry air. It is suitable for applications where a lower dew point is required.

Atlas Copco also offers a series of oil coalescing filters such as DD+, PD+, and UD+. These filters can effectively reduce oil suspended matter, wet dust, and water droplets in the compressed air flow. Among them, DD+ is used for filtering oil suspended matter and wet dust; PD+ not only filters oil suspended matter and wet dust, but also can perform water separation; UD+ integrates the two filtration steps of DD+ and PD+ into one technology, which can save space and energy.

The design features of the computer controller module of Atlas Copco portable mobile air compressor Modular structure: The controller module is connected to other components of the equipment through standardized interfaces, facilitating maintenance and replacement, and reducing maintenance costs. Energy-saving optimization: Through precise control algorithms, unnecessary energy consumption is reduced, helping the equipment achieve better fuel efficiency or power consumption levels. This controller module integrates intelligent technology with the operation of the compressor deeply, not only simplifying the operation process, but also significantly enhancing the reliability and economy of the equipment, and is an important manifestation of the advanced performance of Atlas Copco portable air compressors.

Replacement and Maintenance Precautions Cycle Compliance: Follow the specified cycle in the equipment manual for replacement (e.g., air filter every 2000 - 4000 hours, oil-gas separator every 8000 - 12000 hours). In harsh environments (dusty, high temperature), check and replace in advance. Installation Specifications: Release system pressure before replacement and clean the interior of the filter housing. The sealing parts of the new filter need to be coated with clean lubricating oil (for oil filter) or compressed air (for air filter) to ensure a reliable seal. Tighten the end cover or housing with the specified torque to avoid over-tightening which may damage the shell or under-tightening which may lead to leakage. Kit Integrity: The original factory kit includes all necessary components (such as sealing parts, small gaskets), and when replacing, all components must be updated. Do not mix and use old parts.

2901056800 Atlas Copco Advantage: No need to move the compressor. Maintenance work can be carried out directly from the front end of the equipment, saving space and labor costs. At the same time, the standardized kit configuration can avoid delays during maintenance due to mismatch of tools and spare parts, which is particularly suitable for scenarios in industrial production where continuous operation of equipment is required.

Daily Maintenance of Air Compressor Intake Valve by Atlas Copco Regular Cleaning: The intake valve is prone to contamination from dust and impurities in the air. It should be disassembled and cleaned regularly to prevent the valve core from getting stuck and affecting normal operation. Check Seals: Aging or damaged sealing components such can lead to air leakage. Regular inspections and timely replacements are necessary. Lubrication Maintenance: For intake valves with moving parts, lubricants should be added according to the instructions to ensure smooth operation. Function Testing: Regularly test the smoothness of the valve's opening and closing and its response time to ensure it can accurately act according to pressure changes. If the intake valve malfunctions, it may cause problems such as insufficient air output, unstable pressure, increased energy consumption, and even affect the lifespan of the entire machine. Therefore, daily maintenance and upkeep are particularly important.