China 1901064370 Manufacturer, Supplier, Factory

Atlas Copco Z160-275 transmission shaft bearing kit usage and maintenance precautions: When replacing, it must be operated by professional technicians. Follow the steps in the equipment maintenance manual strictly to ensure that the bearings are installed properly and the clearance is adjusted reasonably. Before installation, clean the transmission shaft and bearing housing, and check whether the relevant mating surfaces are intact to avoid impurities or damage affecting the bearing lifespan. It is recommended to conduct regular inspections in combination with the overall maintenance cycle of the equipment. If abnormal bearing noise or abnormal temperature rise is detected, the kit should be replaced promptly.

Atlas Copco 1901064370，The Atlas Copco intake valve controls the intake volume by adjusting the opening degree of the intake port according to the pressure changes in the storage tank, achieving loading and unloading control, and protecting the function to prevent a large amount of gas from entering the compressor head when it starts, reducing the starting current of the motor, and operating in a regular pattern of being loaded when powered and unloaded when power is lost. It has a capacity adjustment control function. Minimum pressure valve pressure establishment: When the equipment starts, it quickly establishes the circulating pressure required for lubrication, and the buffer protection control through the gas flow rate of the oil-gas separation filter to prevent high-speed gas flow from damaging the separation effect. Check valve function: Prevents the gas in the storage tank from flowing back to the oil-gas tank. Safety valve overpressure protection: Automatically opens when the system pressure exceeds the specified value, discharging the gas into the atmosphere. Safety device: Prevents pressure equipment and containers from bursting due to excessive pressure, and automatically controls: Automatically closes when the pressure drops to the specified value, ensuring the safe operation of the equipment. Temperature control valve temperature regulation: Controls the proportion of lubricating oil entering the oil cooler according to the principle of thermal expansion and contraction. Temperature protection ensures that the rotor temperature is within the set range, preventing excessive or insufficient temperature. When the refrigeration machine starts, it forces the lubricating oil to enter the compressor head directly without passing through the cooler, achieving rapid heating. Electromagnetic valve control system has two types of medium regulation for loading and venting: used to adjust the bias, flow rate, speed, on-off parameters and precisely control the connection and disconnection of the oil-gas tank to the intake valve through the cylinder pipeline under PLC instructions.

Atlas Copco 2906081200,Reduce noise pollution by using pipe cross-section variations, resonant cavities or small hole structures to cause the sound waves to reflect, interfere or absorb during their propagation, thereby reducing the radiated sound energy. After installation, it can reduce the airflow noise by 38 to 60 dB and the loudness by 75% to 99%. It protects equipment and extends its lifespan. Install buffer silencers at high-pressure outlet points such as the air compressor discharge valve to reduce air flow impact, lower the wear on the valves, and extend the equipment's service life.

Atlas Copco 2901990095,The main function is core maintenance and support, covering key components such as intake valves, temperature control valve cores, rotary valves, and pressure maintaining valves, which are used for quickly repairing air compressor faults and ensuring its continuous and stable operation. The maintenance convenience is provided by standardized components, simplifying the maintenance process and reducing downtime, especially suitable for handling sudden failures and regular maintenance.

Atlas Copco 0301234400,Gaskets are mainly used to fill the microscopic irregularities at the connection points of air compressor components and prevent the leakage of high-pressure gas, coolant or lubricating oil. For example, cylinder gaskets need to withstand the preload force of bolts, high-temperature and high-pressure combustion, as well as corrosion from oil, ensuring the sealing performance of the cylinder and preventing efficiency decline or mechanical failures. In reciprocating compressors, the contact pressure of valve gaskets changes dynamically with the intake and exhaust states, and they need to be elastic to compensate for component deformation and roughness, while also being resistant to fatigue failure. Optimally designed gaskets can evenly distribute stress and meet the minimum sealing pressure requirements of the ASME standard.

The rubber coupling used in 1604724701 Atlas Copco industrial compressors needs to be inspected regularly during maintenance for signs of aging, cracks, deformation or excessive wear. If any damage is found, it should be replaced immediately to prevent the failure of the coupling from causing transmission faults in the compressor and affecting the normal operation of the equipment. It is recommended to use Atlas Copco original factory parts for replacement to ensure compatibility with the equipment and performance.