China 1627456071 Atlas Copco Manufacturer, Supplier, Factory

Maintenance recommendations for pressure sensors of Atlas Copco air compressors: Regularly check if the sensor wiring is secure and clean the oil stains on the probe surface. Calibrate the sensors regularly according to the equipment manual to ensure measurement accuracy. In case of failure, replace the original factory parts (such as Atlas Copco original sensors) first to avoid compatibility issues affecting the performance of the unit.

Maintenance and Replacement Recommendations: Regular Cleaning: Check and clean the filter screen weekly to remove impurities. Increase the frequency in high-humidity environments. Seal Replacement: If there is air leakage, replace the aged O-ring or sealing gasket (it is recommended to use original factory parts) first. Overall Replacement: When the valve body is worn out, the valve core is stuck and cannot be repaired, or the electromagnetic valve continues to malfunction, the entire automatic drainage valve assembly needs to be replaced. Original Factory Compatibility: The interface specifications and pressure ratings of the drainage valves for different models of air compressors are different. It is necessary to select Atlas Copco original components to ensure compatibility and safety.

Atlas Copco G11FF is a small fixed-type oil-injected screw air compressor under the Atlas Copco brand. It is specifically designed for small and medium-sized industrial settings, featuring a compact structure, high efficiency, and reliability. It is widely used in scenarios such as pneumatic tool driving in workshops, small production lines, and laboratories where there is a moderate demand for compressed air.

As an original part, it has precise compatibility with the specific model of air compressor produced by Atlas Copco (the exact compatible model can be referred to in the equipment manual), ensuring filtration efficiency and sealing performance. Its parameters such as filtration accuracy and pressure resistance range all meet the strict standards of the manufacturer. It is generally recommended to replace it according to the equipment maintenance cycle (such as after a certain number of operating hours), to ensure the filtration effect and avoid equipment failure due to filter failure. In industrial production, these oil filters are important consumables for the maintenance and upkeep of air compressors, playing a significant role in ensuring the long-term stable operation of the equipment and reducing maintenance costs.

High quality filtration The configuration and careful selection of the filter materials is key to all filters performance, ensuring maximum filter lifetime, minimal pressure drop and optimal quality of the outlet air.Prevent contamination All our filters are designed for your compressor and ensure a perfect fit preventing unfiltered air or oil from passing through.Reduce oil consumption Low oil carry over keeps your oil consumption to a minimum.

Usage and Maintenance Notes Strictly match the model Different series of air compressors (such as GA, GHS, ZR, etc.) require the use of corresponding model-specific oils. Mixing or using the wrong type may cause equipment damage and affect warranty. Regular replacement and inspection Replace according to the specified cycle in the equipment manual (synthetic oil usually has a longer cycle than mineral oil), and replace oil filters, air filters, etc. at the same time. Regularly test the oil quality (such as viscosity, moisture content, impurity content) to avoid failures caused by deteriorated oil. Storage and refilling The oil needs to be stored in a sealed manner in a cool and dry place to avoid contamination; when refilling, ensure that the tools are clean to prevent impurities from entering the oil circuit system.