China 1613610591 Atlas Copco Manufacturer, Supplier, Factory

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering Catch Cans, the AOS-R (Air Oil Separator, Return) is responsible for keeping blow-by oil and other pollutants out of the air intake, intercooler, manifold, etc. The main difference is that an AOS-R system returns oil back into the pan above the oil level. This permits a service-free system.

For the maintenance of UD 9 + from Atlas Copco, it is recommended to replace the filter elements at the specified intervals as per the equipment manual. During the replacement process, it is necessary to first depressurize the system and have it operated by professionals to ensure safety and installation quality. Specific information such as filtration accuracy, applicable equipment models, and procurement channels.

BY REPLACING THE OIL FILTER ON YOUR COMPRESSOR, YOU PREVENT AN ARRAY OF SHORT AND LONG TERM PROBLEMS, AS WELL AS SAVES YOU DOWN-TIME AND REPAIR COSTS LATER ON.THIS OIL FILTER MEETS OR EXCEEDS OEM SPECIFICATIONS.

2901205500 Atlas Copco screw-type air compressor OSE kit application scenarios 2901205500 Atlas Copco It is mainly used for the regular preventive maintenance of air compressors and serves as a replacement component for repairs when specific faults occur in the equipment. It is recommended to select the corresponding OSE kit based on the 2901205500 Atlas Copco model of the air compressor and the maintenance plan in the user manual.

Atlas Copco muffler maintenance and replacement Regularly clean the filter components of the intake muffler to prevent blockage and reduce intake volume (especially in dusty environments). Check if the muffler is damaged or loose. If the sound-absorbing material is exposed or the structure is deformed, it needs to be replaced in time; otherwise, the noise reduction effect will significantly decrease. The general service life is 1-3 years (depending on the usage environment). For high-frequency use or in harsh environments, the replacement cycle should be shortened. Choosing the appropriate air compressor muffler can not only meet the environmental protection and noise reduction requirements, but also ensure the stable operation of the equipment. It is an indispensable auxiliary device for the air compressor system.

First separation: The oil-gas mixture containing various-sized oil droplets, which comes out from the exhaust port of the air compressor main unit, enters the oil-gas tank. Most of the oil in the oil-gas mixture falls to the bottom of the tank under the action of centrifugal force and gravity. Second separation: The compressed air containing oil mist (particles with a diameter of 1 micron or less) passes through the micrometer and fiberglass filter material layers of the oil-gas separation filter element for secondary separation. The oil particles undergo mechanisms such as diffusion, direct interception, and inertial collision aggregation, causing the suspended oil particles in the compressed air to quickly coalesce into large oil droplets. Under the action of gravity, the oil gathers at the bottom of the oil separation element and returns to the main lubricating oil system through the bottom concave area of the secondary return oil pipe inlet, thereby enabling the air compressor to discharge more pure and oil-free compressed air.