China 1503242000 Manufacturer, Supplier, Factory

Maintenance for the non-driven side motor components of Atlas Copco oil-injected screw compressors Regular inspection Observe whether there is oil leakage or seepage at the non-driven side end cover ， check for abnormal temperature rise， and use a sound detector to determine if there is any abnormal noise. Check the tightness of the end cover bolts to ensure reliable sealing. Bear maintenance Replace the bearing lubricating grease according to the cycle specified in the motor manual， clean the bearing chamber， and avoid mixing new and old lubricating grease. When replacing the bearings， ensure the model is matched， and install them using heat fitting or special tools to avoid damaging the bearings by knocking. Sensor calibration Regularly calibrate the temperature sensor to ensure detection accuracy； check if the connection terminals are oxidized or loose， and clean or tighten them if necessary. Heat dissipation maintenance

Installation advantages: The design features a snap-in mechanism, making installation and disassembly easy. This helps enhance the efficiency of pipeline maintenance while ensuring a tight connection and reducing the risk of leakage.

Common Issues and Maintenance of Atlas Copco Air Compressor Pressure Sensors Common issues with pressure sensors include measurement drift (inaccurate data), signal interruption (line or component failure), interface leakage, etc. Maintenance suggestions: Regularly check the sealing of the sensor installation to avoid pressure leakage or measurement errors due to looseness; Keep the sensor interface clean to prevent oil contamination and impurities from blocking and affecting the measurement; When there is abnormal pressure display, frequent start-stop of the unit, or incorrect pressure protection operation, it is necessary to check if the sensor is faulty. It is recommended to replace the original sensor to ensure performance matching. When replacing, pay attention to keeping the calibration parameters consistent with the original model.

Maintenance and Care Regularly replace filters: air filter, oil filter, oil-gas separator. Prevent impurities from entering the system. Check the lubricating oil: oil level, oil quality (oxidation, emulsification). Replace the oil according to the manufacturer's recommended schedule. Clean the cooling system: For air-cooled models, clean the radiator regularly; for water-cooled models, check the water quality and temperature. Tighten bolts: Prevent vibration from causing bolts to loosen, which may lead to safety hazards. Monitor operating parameters: Regularly record exhaust temperature, pressure, current, etc. Address any abnormalities promptly.

As an air compressor manufacturer, we often receive inquiries from customers. The company wants to purchase a batch of air compressors but doesn’t know how to choose or how to make reference. Here we summarize for you how to choose a suitable air compressor in general.

The stability of the valve-type vacuum control device of Atlas Copco directly affects the energy efficiency and safety of the air compressor system. When selecting the device, parameters such as the working pressure range, medium characteristics (such as whether it contains corrosive gases), and response speed should be taken into consideration.