China 0663211199 Atlas Copco Manufacturer, Supplier, Factory

Replacement Precautions Before installation, clean the oil stains and impurities on the interface surface to avoid scratching the sealing ring. Ensure a proper installation to avoid distortion or excessive stretching, which may affect the sealing effect. It is recommended to conduct regular checks and replace it in a timely manner according to the usage environment (such as humidity, temperature, and medium). Generally, it is advisable to replace it synchronously with the equipment maintenance cycle.

Installation and Maintenance Instructions Oil pipes inside the unit: Replace after shutdown, depressurization and cooling; Record the direction and connection sequence, clean the interfaces, assemble according to the specified torque; Recheck the pressure drop and leakage after operation. Gas pipelines: Avoid excessive bending / stretching and dragging on the ground; Regularly inspect the joints and wear; Perform a gas tightness test when necessary.

Maintenance and replacement instructions for the transmission shaft seal kit of Atlas Copco screw air compressors If oil stains or oil leakage are observed near the transmission shaft, or if the consumption of compressor lubricating oil increases abnormally, it may be due to the aging or damage of the seal kit. Therefore, it is necessary to check and replace it in time. When replacing, it is recommended to use the original kit and operate in accordance with the equipment manual to ensure that the seal is installed in the correct direction and tightly attached. In case of necessity, special tools can be used for installation to avoid deformation or damage to the seal.

Selection and replacement of the AC24V 50Hz 16Bar electromagnetic valve in Atlas Copco air compressors: This specification of the electromagnetic valve is not a universal part. It needs to match the control logic and installation dimensions of the specific air compressor model (such as a certain model in the GA series, GHS series, etc.). When replacing, provide the model and serial number of the air compressor and the component number of the original electromagnetic valve. It is recommended to purchase through Atlas Copco's official after-sales service or authorized dealers to ensure compatibility with the equipment's control system and pressure compatibility.

2901156000 The original Atlas Copco assembly includes components such as oil filters, air filters, oil-gas separation filters, gaskets, and sealing rings.

Precautions for maintenance and replacement of intake valve of Atlas Copco ZR300-425 series industrial screw air compressor: It must be operated by trained professional technicians, strictly following the official maintenance manual of ZR300-425 series to carry out the disassembly and assembly process, in order to avoid damaging the valve seat or other related components due to improper operation. Before replacement, it is necessary to thoroughly clean the intake valve chamber to remove impurities such as carbon deposits and oil stains, in order to prevent impurities from affecting the service life of new components. It is recommended to give priority to the original Atlas Copco repair kit, so as to ensure that all components are completely matched with the intake valve of ZR300-425 model, and ensure the maintenance quality and the reliability of the subsequent operation of the equipment.