China 0634100085 Atlas Copco Manufacturer, Supplier, Factory

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc. Preventing oil passage blockage: Prevent impurities from accumulating in the oil passage, ensure the smoothness of the oil passage, enable the lubricating oil to circulate normally, provide sufficient lubrication and cooling for each component, and prevent problems such as overheating shutdown caused by insufficient oil supply.

Atlas Copco Air compressor HOURMETER The speedometer is the "barometer" of the operating condition of the air compressor. By monitoring the changes in its values, potential problems of the equipment can be detected in a timely manner, ensuring the efficient and stable operation of the unit. During daily operations, it is recommended to comprehensively analyze the equipment status by combining the other parameters displayed by the control unit (such as pressure, temperature, and current).

When using it, it is recommended that professional technicians operate it in accordance with Atlas Copco's maintenance manual to ensure the quality of the repair and avoid the failure of the check valve due to improper installation, which may affect the normal operation and safety of the compressor. If you need to purchase or know about the specific compatible models, please contact us.

Atlas Copco, as a globally renowned manufacturer of air compressors and industrial equipment, uses rolling bearings in its equipment as one of the core components ensuring the efficient and stable operation of the machinery. These bearings are usually specially designed or selected based on the structural characteristics and operating conditions of different models (such as screw-type, piston-type, and centrifugal air compressors), and they have high matching accuracy and reliability.

Atlas Copco 1901902344,The function of the Atlas Copco air compressor vent valve: To safely release pressure. When the equipment is shut down or stopped, it automatically discharges the internal gas to prevent pressure accumulation and the risk of explosion or equipment damage. Some models can monitor pressure in real time and automatically adjust the venting volume to avoid surge phenomena. System pressure reduction: By controlling the gas discharge, it ensures the stability of the pressure in the equipment and pipeline system, especially suitable for high-pressure environments. Auxiliary startup: After shutdown, it automatically releases pressure to help the oil and gas tank quickly reduce the base pressure, facilitating the next startup.

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.