Air compressor spare parts

If you need to purchase Atlas Copco products or replace the screws of Atlas Copco air compressors, it is recommended that you select products with matching specifications and performance based on the model of the air compressor, specific components, and the regulations in the equipment manual, in order to ensure the safe and stable operation of the air compressor.

Key points for selecting the drainage device of the ATLAS COPCO oil-injected screw compressor Energy conservation priority: Choose the IWD zero-loss drainage device to reduce the loss of compressed air leakage. Complex system / High oil content: Prefer EWD or IWD, which support corrosion resistance and harsh working conditions. No electricity required and low cost: Choose the WD automatic drainage valve; for light-load clean systems, the TWD can be used. Original factory compatibility: Prioritize the use of the original factory automatic drainage kit (such as 2901056300) to ensure compatibility and maintenance cycle

Function: Filtering impurities: During the operation of the air compressor, the lubricating oil will generate metal debris due to friction with metal components, and the oil itself will also produce gums and other impurities due to heating and oxidation with air. The oil filter can effectively remove these impurities, such as metal particles and deteriorated oil substances. The filtration accuracy is usually between 5-15 μm, maintaining the cleanliness of the oil passage, preventing impurities from entering critical components such as bearings, gears, and main body cavities, reducing wear and extending the service life of the equipment. Ensuring lubrication effect: Ensure that the oil entering the main unit is pure, maintain good lubrication performance, allow the friction surfaces to be fully lubricated, reduce friction loss, and avoid faults caused by poor lubrication due to impurities, such as bearing damage, rotor seizing, etc. Preventing oil passage blockage: Prevent impurities from accumulating in the oil passage, ensure the smoothness of the oil passage, enable the lubricating oil to circulate normally, provide sufficient lubrication and cooling for each component, and prevent problems such as overheating shutdown caused by insufficient oil supply.

The air compressor temperature sensor is an important component used for real-time monitoring of the temperatures of key parts of the compressor unit (such as exhaust temperature, oil temperature, and motor temperature, etc.). Its core function is to detect temperature changes and provide data support for the control system, ensuring that the equipment operates within a safe temperature range. At the same time, when abnormal temperatures occur, it triggers protection mechanisms (such as shutdown and alarm) to prevent mechanical failures or safety risks caused by overheating.

Atlas Copco The oil filter and oil separator service kit for the air compressor is a comprehensive accessory set used for the maintenance and servicing of the compressor's oil and gas system. It is mainly used to replace the key filter elements regularly to ensure the cleanliness of the compressor's oil circuit and thorough oil-gas separation, thereby guaranteeing the efficient operation of the equipment and extending its service life.

Atlas Copco The air compressor water separator (also known as a compressed air dryer or water vapor separator) is a key device in the compressed air system used to remove and separate moisture and condensate in the compressed air. Its core function is to remove the water vapor generated during the compression process, preventing moisture from entering downstream equipment (such as pneumatic tools, pipelines, instruments, etc.) and causing corrosion, blockage or performance degradation.