China THERMOSTATIC VALVE KIT 2901906800 Manufacturer, Supplier, Factory

Maintenance instructions for the intake valve repair kit of Atlas Copco air compressors When the compressor experiences insufficient intake volume, unstable pressure, difficulty in discharging, or abnormal increase in energy consumption, it may be related to the malfunction of the intake valve. It is recommended to check and use the original repair kit for repair. During the maintenance process, follow the standard procedures in the equipment manual to ensure the correct installation of parts (such as the direction of the sealing ring, the pre-tightening force of the spring, etc.). In necessary cases, professional technicians should operate to ensure the quality of the repair.

The Atlas Copco C242 screw air compressor discharge valve repair kit is applicable for maintenance recommendations. Applicable models: Specifically designed for the C242 screw air compressor model. It is necessary to confirm the specific production batch and discharge valve model of the equipment (this can be verified through the equipment serial number or part number). Replacement Timing： When there are abnormal compressor pressure， significant pressure remaining during discharge， slow loading response or abnormal air leakage sounds， etc.， it may indicate that the discharge valve needs maintenance or replacement of components. At this time， this kit can be used for maintenance. Installation note： It is recommended to operate by professional technicians according to the original factory maintenance manual to ensure correct assembly and avoid secondary faults caused by improper installation.

Atlas Copco Purchase Recommendation The intake valve assembly and regulator module are the "breathing control center" of the air compressor, and their performance directly affects the energy consumption and stability of the equipment. It is recommended to purchase original factory parts through our authorized dealers of Atlas Copco. The original factory components have undergone strict compatibility tests and can ensure compatibility and long-term reliability with the Z110-145 series models. Non-original factory parts may result in insufficient control accuracy due to size deviations or material issues, and even shorten the equipment lifespan. Regular inspection and timely maintenance of these two components are the key to ensuring the efficient and stable operation of the air compressor.

Replacement Precautions Before installation, clean the oil stains and impurities on the interface surface to avoid scratching the sealing ring. Ensure a proper installation to avoid distortion or excessive stretching, which may affect the sealing effect. It is recommended to conduct regular checks and replace it in a timely manner according to the usage environment (such as humidity, temperature, and medium). Generally, it is advisable to replace it synchronously with the equipment maintenance cycle.

ATLAS COPCO Air Compressor "Purification Tube Assembly" Replacement and Maintenance Recommendations Replacement Cycle: At least once a year; Replace when pressure drop exceeds preset value or indicator indicates; In some operating conditions, this can be shortened to 4,000 hours or less. Operation Points: Replace the entire unit or isolate and depressurize the part before replacement; Check the double O-rings and other seals during replacement; Do not clean the filter element; Only replace the original factory parts. Energy Savings Benefits: High-quality filter elements can reduce pressure drop and lower energy consumption; Ignoring the replacement will lead to a significant increase in energy consumption.

The control unit of Atlas Copco's injection-type screw compressors is designed with intelligence, which not only simplifies operation management but also significantly improves the operating efficiency and reliability of the equipment. It is a key guarantee for achieving the "efficient, energy-saving, and safe" operation of the compressors. When choosing, it is necessary to match the corresponding specification of the control unit according to the compressor model and actual working conditions.