China Temperature Control Valve Air compressor Manufacturer, Supplier, Factory

Maintenance recommendations for the oil filter of Atlas Copco screw air compressors: Replacement cycle: Under normal operating conditions, replace the filter once every 2,000 - 3,000 hours. In harsh environments (such as high dust and high temperature), this period should be shortened to 1,500 hours. Synchronous operation: When replacing the filter element, also simultaneously discharge the settled oil at the bottom of the oil tank (containing a large amount of impurities) and refill the oil to the specified level. Selection requirements: It is necessary to select original factory or certified filter elements that match the compressor model to avoid equipment damage due to size mismatch or insufficient filtration accuracy. Effective maintenance of the oil filter can significantly reduce the wear rate of the screw main unit and is a key aspect of the daily maintenance of the compressor unit with low cost and high efficiency.

Atlas Copco AIR INLET WITH FILTER: Regular maintenance of the inlet with a filter can effectively reduce the failure rate of the air compressor, extend the equipment's lifespan, and ensure that the output compressed air meets the cleanliness requirements of subsequent pneumatic equipment, pneumatic tools, or processes (for example, the cleanliness requirements for compressed air in the food and pharmaceutical industries are higher, and a post-treatment filtration system may also be needed in some cases).

The function of the oil separator: Protective equipment: Prevent oil and water from entering subsequent pneumatic equipment, pipelines and valves, etc., avoiding equipment wear, corrosion and blockages caused by oil and water, and extending the service life of the equipment. Improve air quality: Separate oil and water from compressed air, enabling initial purification of the compressed air, providing clean and dry compressed air for the production process, ensuring product quality, especially in industries with strict air quality requirements, such as electronics, food, and pharmaceuticals, this is particularly important. Energy conservation and environmental protection: Through effective separation of oil and water, achieve the recycling of oil and the compliant discharge of water, reducing resource waste and environmental pollution, meeting environmental protection requirements, and lowering the operating costs of enterprises.

Common Misconceptions and Risks Replacing only the oil but not the filter: Impurities accumulate, accelerating wear and clogging. Overdue use: Increased pressure difference leads to higher energy consumption and an increased risk of filter damage. Installation too tightly: May cause the base to deform or make future disassembly difficult.

The significance of choosing the Atlas Copco air compressor oil filter kit service package By using the original Atlas Copco oil filter kit service package, it is ensured that the filter components are precisely matched with the lubrication system, avoiding damage to the main unit or oil leakage caused by size deviations of non-original parts or insufficient filtration accuracy. The modular design also simplifies the maintenance process, reduces the risk of missing parts, and is an important maintenance solution for ensuring the long-term reliable operation of the air compressor lubrication system.

Faults and Replacement Suggestions: Common Faults and Handling: Winding Burnout: Usually caused by abnormal voltage or long-term overloading, manifested as the electromagnetic valve not moving. It is recommended to replace the entire electromagnetic valve (including the winding); Valve Core Stuck: Caused by impurities or oil contamination, preventing the valve from fully opening or closing, which may lead to abnormal pressure or poor drainage. It is necessary to replace the original part; Leakage: Caused by aging of the sealing components, it is necessary to replace in time to avoid loss of compressed air or engine oil. When replacing, please note: Power off operation, confirm that the voltage specification is consistent, and when installing, the sealing component should be coated with a small amount of engine oil to enhance the sealing performance.