China Gear Flex Coupling Element Kit Manufacturer, Supplier, Factory

Troubleshooting and Replacement Suggestions: Common Issues and Solutions: Stalling or Leakage: Causes unstable pressure and increased energy consumption. It is recommended to disassemble and clean or replace directly (it is suggested to replace the entire set to avoid matching issues between new and old components). Reduced Adjustment Precision: Mostly due to wear of sensors or valve cores. Replacement of the original kit is required and recalibration is necessary. Installation Tips: After replacement, parameter matching through the controller (such as setting pressure upper and lower limits) is necessary to ensure normal system linkage.

When purchasing, it is recommended to provide the specific model information of the air compressor through our Atlas Copco distributors to obtain the matching genuine carbon seals, ensuring compatibility with the equipment and guaranteeing the sealing effect. During installation and replacement, it is also necessary to be operated by professional technicians to achieve the best sealing performance.

If you need to purchase Atlas Copco products or replace the screws of Atlas Copco air compressors, it is recommended that you select products with matching specifications and performance based on the model of the air compressor, specific components, and the regulations in the equipment manual, in order to ensure the safe and stable operation of the air compressor.

Maintenance cycle and failure manifestations of the transmission shaft seal kit for Atlas Copco air compressors: It is recommended to inspect once every 8,000 - 12,000 operating hours, or replace it immediately if there is oil leakage on the outside of the machine body. Failure symptoms: Oil leakage (oil type), abnormal loss of compressed air, abnormal noise from bearings (caused by impurities intrusion) If you need specific part information, please provide the complete model of the air compressor (such as GA22 VSD) and the production year, so that we can accurately query the specifications and replacement manual of the original Atlas Copco seal kit.

The oil filter element of Atlas Copco air compressors (Common Problems and Failure Causes) The filter element gets clogged prematurely Reasons: Excessive environmental dust (unfiltered intake air), excessive oil addition or mixing of different brand oils leading to emulsification, increased internal wear . Treatment: Improve environmental cleanliness, standardize oil usage, inspect worn components. Poor filtering effect Reasons: Using inferior filter elements , seal ring not properly aligned during installation , bypass valve always open. Treatment: Select original factory or high-quality aftermarket filter elements, ensure proper installation sealing, regularly check bypass valve function. Filter element rupture Reasons: Installation too tight, abnormal system pressure increase, insufficient strength of filter element material. Treatment: Standardize installation torque, check oil pressure control system, replace with qualified filter element.

Maintenance and replacement instructions for the VCU (Valve Control Unit) service kit of Atlas Copco screw air compressors When the compressor experiences frequent loading/unloading, pressure out-of-control, valve sticking, or VCU leakage, it may be related to the valve control unit failure. It is recommended to use this service kit for repair. During the replacement process, follow the specifications in the equipment manual, pay attention to the correctness of electrical connections and the installation direction of sealing components, and if necessary, calibrate the control parameters to ensure that the VCU function returns to normal after the repair.