China Cover Valve Manufacturer, Supplier, Factory

Maintenance and servicing tips for the tubular coolers of Atlas Copco compressors: Regular cleaning: Depending on the operating environment, clean the inside and outside of the cooling tubes of the tubes and the sealing surfaces of the caps (using chemical cleaning or mechanical flushing) to prevent a decline in heat exchange efficiency. Leak detection: Check for any leaks at the pipe connections and sealing surfaces of the caps. Replace the seals or repair damaged pipes in a timely manner. Flow monitoring: Ensure that the flow and pressure of the cooling medium (water or air) are within the specified range. If insufficient, investigate pipe blockages or pump/fan failures. Anti-freezing protection： In low-temperature environments， after shutdown， drain the accumulated water in the cooling water pipes to prevent cracking due to freezing.

The oil filter assembly of the air compressor is one of the key components that ensure the normal operation of the compressor. Its main function is to filter out impurities, metal particles, and sludge in the oil, preventing them from entering the critical friction components of the engine or the compressor (such as bearings, pistons, cylinders, etc.), thereby reducing wear, extending the equipment's lifespan, and ensuring the efficient operation of the lubrication system.

Atlas Copco XC2002 Operating Instructions Before operation, it is necessary to familiarize yourself with the equipment manual to avoid parameter errors that may cause protection functions to fail. Regularly check the connection lines of the controller and sensors to ensure stable signal transmission. When a fault alarm occurs, you need to identify the cause based on the code (such as sensor failure, exceeding actual parameters, etc.), solve the problem before restarting the equipment.

The oil cooler of Atlas Copco air compressor GA132 functions as follows: The oil cooler is used to cool the lubricating oil during the operation of the air compressor, absorbing the heat from the compressed air that the lubricating oil has absorbed, and ensuring that the temperature of the lubricating oil remains within an appropriate range, thereby guaranteeing the normal operation and lubrication effect of the air compressor.

If you need to purchase or replace the air compressor head of this model, it is recommended to do so through our Atlas Copco dealers to ensure the authenticity of the parts and the subsequent installation, after-sales support. At the same time, when replacing the air compressor head, professional technicians are usually required to operate to ensure the installation is in accordance with specifications and avoid affecting the normal operation of the air compressor.

Order will be placed on standard delivery conditions. After the order is placed, an order acknowledgement and tracking information will be provided to you by email.