China compressor parts atlas copco Manufacturer, Supplier, Factory

Common Issues and Maintenance of Atlas Copco Air Compressor Pressure Sensors Common issues with pressure sensors include measurement drift , signal interruptio, interface leakage, etc. Maintenance suggestions: Regularly check the sealing of the sensor installation to avoid pressure leakage or measurement errors due to looseness; Keep the sensor interface clean to prevent oil contamination and impurities from blocking and affecting the measurement; When there is abnormal pressure display, frequent start-stop of the unit, or incorrect pressure protection operation, it is necessary to check if the sensor is faulty. It is recommended to replace the original sensor to ensure performance matching. When replacing, pay attention to keeping the calibration parameters consistent with the original model.

Failure causes and maintenance suggestions for Atlas Copco Air compressor O-ring Common failure causes: Long-term high-temperature aging leads to reduced elasticity, wear or scratches (such as impurities entering the sealing surface), improper installation (such as twisting, being too tight), incorrect selection (material not suitable for the medium or temperature). Maintenance precautions: Regularly inspect the condition of the O-ring. Replace it promptly if it shows signs of hardening, cracking, deformation or leakage. When replacing, clean the sealing groove and mating surface, remove oil stains, burrs and impurities. Avoid using sharp tools to scratch the O-ring during installation. If necessary, apply special lubricating grease (compatible with the medium) to assist in installation. Select matching specifications and materials for the O-ring based on the air compressor model and location.It is recommended to use original factory parts to ensure the sealing effect.

Atlas Copco Oil Separator Element Kit for Old Style GA Series Rotary Screw Compressors - 2901 1963 00

Selection and Notes on Compatibility Compatibility: Select matching accessories based on the model of the Atlas Copco air compressor, working pressure (typically 0.7-1.6 MPa), and hose type (rubber, PU, etc.). Ensure that the dimensions and specifications are consistent. Material Compatibility: For humid environments, choose stainless steel accessories; for ordinary industrial environments, you can use brass or galvanized steel accessories to avoid corrosion and affect the sealing performance. Regular Maintenance: Check the sealing of the joints, the flexibility of the valves, and the integrity of the protective covers. Replace any leaks or damages promptly to ensure system efficiency and safety.

The 4000-hour oil filter usage recommendation for Atlas Copco: It is necessary to replace the filter according to the equipment manual, taking into account the operating time and actual oil condition. Even if it has not reached 4000 hours, if you find that the filter is clogged or the pressure difference is too high, you should replace it promptly. When replacing, it is necessary to use original factory parts to ensure the filtering performance and equipment safety. Avoiding failures such as main unit wear caused by inferior filters.

Oil coalescence filters with patented Nautilus technology. Compressor element lubrication and your compressor installation itself can release oil aerosols and wet dust in your air system. PD+ filters efficiently remove these contaminants to protect your equipment and your processes. These innovative filtration solutions are engineered to cost-effectively provide the best air purity and meet today’s increasingly stringent quality requirements.